Sony DVP-CX870D Operating Instructions - Page 12

Getting Started 5.1 Channel Surround Hookups Some DVDs have a sound track with up to 5.1 channels recorded in Dolby Digital or DTS format. Using a receiver (amplifier) having 5.1 channel inputs and 6 speakers, you can enjoy a more realistic audio presence in the comfort of your own home. "5.1 channel" stands for the 2 front speakers (Left and Right), 2 rear speakers (Left and Right), 1 center speaker, and a subwoofer. Even if you have fewer than 6 speakers, the player appropriately distributes the output signal to the speakers. This player also has a VIRTUAL 3D SURROUND mode. You can use 3D sound imaging to shift the sound of the rear speakers away from the actual speaker position (VIRTUAL REAR SHIFT) or to create 3 sets of virtual rear speakers from 1 set of actual rear speakers (VIRTUAL MULTI REAR, etc.). For details on the VIRTUAL 3D SURROUND mode, see page 47. Speaker placement For the best possible surround sound, we recommend the following conditions. • Use higher performance speakers. • Use rear and center speakers that match your front speakers in size and performance. • Place the subwoofer between the front (L, R) speakers if possible. Note Do not place the rear speakers farther away from the listening position than the front speakers. Required cords Audio cords (not supplied) (2) For the 5.1 CH OUTPUT FRONT and REAR jacks White (L) Red (R) White (L) Red (R) Monaural audio cords (not supplied) (2) For 5.1 CH OUTPUT CENTER and WOOFER jacks. Do not connect the power cord to a switched AC outlet such as the AC outlet on a receiver (amplifier). Doing so may cause the Playback Memory, Bookmark, Disc Explorer and menu settings to be cancelled when you turn off the receiver. Notes • Do not connect the power cord to an AC outlet or press the POWER switch before completing all connections. • Refer to the instructions supplied with the component to be connected. • The cord connectors should be fully inserted into the jacks. A loose connection may cause hum and noise. • If you want to connect the component via the DIGITAL OUT OPTICAL or COAXIAL connector using an optical or coaxial digital connecting cord (not supplied), see page 10. Setups for the player Some setup adjustments are necessary for the player depending on the components to be connected. Use the setup display to change the various settings. For details on using the setup display, see page 63. • To enjoy surround sounds by connecting the player to a receiver (amplifier) with 5.1 channel inputs Correctly adjust each speaker to your listening position (page 75). S video cord (supplied) (1) For the S VIDEO OUTPUT jack When connecting the cords, be sure to match the color-coded cord to the appropriate jacks on the components: Red (right) to Red and White (left) to White. Be sure to make connections firmly to avoid hum and noise. 12