Sony DVP-CX870D Operating Instructions - Page 77
SPEAKER SETUP, Adjusting the speaker volume
View all Sony DVP-CX870D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Settings and Adjustments Adjusting the speaker volume 1 After you stop playback, select "SPEAKER SETUP" in the setup display. 2 Select "TEST TONE" and set "TEST TONE" to "ON." You will hear the test tone from each speaker in sequence. 3 From your listening position, select "BALANCE" or "LEVEL" and adjust the value of "BALANCE" using
77
Settings and Adjustments
Adjusting the speaker volume
1
After you stop playback, select
“
SPEAKER SETUP
”
in the setup display.
2
Select
“
TEST TONE
”
and set
“
TEST TONE
”
to
“
ON.
”
You will hear the test tone from each speaker in
sequence.
3
From your listening position, select
“
BALANCE
”
or
“
LEVEL
”
and adjust the value of
“
BALANCE
”
using
<
/
,
and
“
LEVEL
”
using
M
/
m
.
The test tone is emitted from both left and right
speakers simultaneously.
4
Select
“
TEST TONE
”
and set
“
TEST TONE
”
to
“
OFF
”
to turn off the test tone.
To adjust the volume of all the speakers at one
time
Use the receiver’s (amplifier’s) volume control.