Sony ICF-SW7600GR Operating Instructions - Page 15
Changing MW Channel Step
UPC - 027242580084
View all Sony ICF-SW7600GR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Changing MW Channel Step B Listening to the radio Changing MW Channel Step The MW channel step differs depending on the area as shown in the table below. Select the channel step according to your area. Channel step according to area Area North and South American countries Other countries Channel step 10 kHz 9 kHz 1 3 2 4 1 Press POWER ON/OFF to turn off the radio. 2 Press DIRECT. Perform Step 3 within 10 seconds. Otherwise, the unit will return to the condition prior to Step 2. In this case, repeat from Step 2. In addition, perform steps after Step 3 within 10 seconds as well. 3 Enter the channel step using the number buttons. To enter 9 kHz, press 9 and to enter 10 kHz, press 1 and 0. 4 Press EXE to finish operation. The entered channel step will flash for about 3 seconds and the unit will return to the clock display. Two short beeps will be heard when entering numbers other than "9" and "10". In this case, repeat from Step 2 after returning to the clock display. Listening to the radio 15GB