Sony ICF-SW7600GR Operating Instructions - Page 21

Searching the station automatically - Auto scan tuning Tips • The unit scans the frequencies in descending order when holding down -?K, and in ascending order when holding down k?+. • To change the scanning direction, hold down either -?K or k?+ opposite to the current direction for 3 seconds. This is convenient when you want to return to the previous reception after the unit has resumed scanning. To adjust the reception sensitivity for scanning - Using the ATT switch and ATT control When scanning for MW broadcasts at night when reception is intense or when scanning under prevalent interference, the unit may stop scanning to null broadcasts frequently. If the unit stops scanning frequently, adjust the reception sensitivity. Under normal conditions, set the ATT switch to OFF (maximum reception sensitivity). ATT control ATT switch 1 Set the ATT switch to ON. The ATT control is enabled. 2 Turn the ATT control and adjust the reception sensitivity. Turn the ATT control toward MAX to reduce sensitivity. The unit will skip weaker signals and stop at only stronger ones. Note If the ATT control is turned too much toward MAX, the unit will not stop at any weaker signals at all. Set the ATT switch to OFF if you do not need to use the attenuator. Listening to the radio 21GB