Sony KDF-55XS955 Operating Instructions (Large File - 14.9 MB) - Page 54

Setting Up the LCD Projection TV Setting Up the LCD Projection TV Channel List After you finish connecting the TV, you need to run the Initial Setup feature, which automatically creates a list of available analog and digital channels. The Initial Setup screen appears when you turn on your TV for the first time after hooking it up. If you do not want to set up the channels at this time, you can do it later by selecting the Auto Program option in the Channel menu (see page 102). ✍ The Initial Setup feature does not apply for installations that use a cable box for all channel selection. Using Initial Setup To run Initial Setup the first time you turn on your TV 1 Press POWER to turn on the TV. z If you are using a CableCARD, Auto The Initial Setup screen appears. 2 Program is disabled for Press V or v to select the on-screen display language. Then press . the CABLE input. The message "Start auto program now?" appears. 3 Press V or v to select "Yes", then press . Initial Setup automatically creates a list of receivable channels. When finished, the lowest numbered channel is displayed. To run Auto Program again at a later time ❑ Use the Auto Program feature as described on page 102. To add individual digital channels ❑ Use the Digital Channel feature as described on page 102. ✍ Auto Program may take up to 50 minutes to complete. A progress bar is displayed while the channel list is being created. 54