Sony MZ-NH900 Operating Instructions - Page 42

To start/stop recording in sync with the sound source (Synchro-recording) During synchro-recording, the starting and stopping of recording occurs are synchronized with the sound source. This simplifies digital recordings (e.g., from a CD player) since the need to operate the recorder or the sound source is eliminated. Synchro-recording is only possible with the optical cable connected. Jog dial NAVI/MENU Notes • The pause function cannot be turned on or off manually during synchro-recording. • Do not switch the "SYNC REC" setting while recording. Recording may not be done properly. • Even when there is no sound on the sound source, there may be cases when recording does not pause automatically during synchrorecording due to the noise level emitted from the sound source. • If a silent portion is encountered for approximately 2 seconds during synchrorecording from a sound source other than a CD or an MD, a new track mark is automatically added at the point where the silent portion ends. 5-way control key (NENT) 1 Make connections. Use the appropriate optical cable to suit the source equipment. For details, see "Optional accessories" (page 87). 2 While the recorder is stopped, enter the menu and select "REC Set" "SYNC REC" - "SYNC On". z When there is no sound from the player for about 3 seconds during synchro-recording, the recorder goes into the standby mode automatically. When the sound comes from the player again, the recorder resumes synchrorecording. If the recorder is kept in the standby mode for 5 minutes or longer, the recorder stops automatically. 42