Sony MZ-NH900 Operating Instructions - Page 54
To modify and store the sound, Varying the virtual sound to, create different acoustics, Virtual-
View all Sony MZ-NH900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
To modify and store the sound You can modify the sound and store the results in "Custom1" and "Custom2". 1 Do steps 1 to 3 of "Selecting the sound quality (6-Band Equalizer)" (page 53), and slide the jog lever until "Custom1" or "Custom2" appears. 2 Press the jog lever. 3 Slide the jog lever repeatedly to select the frequency. Frequency (100 Hz) From the left, you can select 100 Hz, 250 Hz, 630 Hz, 1.6kHz, 4 kHz, or 10 kHz 4 Turn the volume control repeatedly to adjust the level. Level (+10 dB) You can select from among seven levels. -10 dB, -6 dB, -3 dB, 0 dB, +3 dB, +6 dB, +10 dB 5 Repeat steps 3 and 4 to adjust the level for each frequency. 6 Press the jog lever to enter the selection. Notes • Virtual-Surround and 6-Band Equalizer will not function during recording. • Virtual-Surround and 6-Band Equalizer stop functioning whenever an external component is connected to the i/LINE OUT jack. 54 On the recorder Jog dial NAVI/MENU 5-way control key (NENT, ., >) Varying the virtual sound to create different acoustics (Virtual-Surround) 1 Enter the menu and select "Sound" - "V-SUR". 2 Turn the jog dial repeatedly to select the surround mode, and then press NENT to enter the selecteion. A Indication which represents each sound mode appears. B Each time you turn the jog dial, A changes as follows. When you press NENT, B appears. A B Studio VS Live VL Club VC Arena VA