Sony RM-VL900 Operating Instructions (primary manual) - Page 24
Programming a series of, commands to the SYSTEM, CONTROL buttons
View all Sony RM-VL900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Executing a Series of Commands - System Control Function (continued) Programming a series of commands to the SYSTEM CONTROL buttons If a series of commands is already programmed on that button (At the factory, the SYSTEM CONTROL 1 button is preset with the System Power-Off function for Sony components, and the SYSTEM CONTROL 3 button is factory preset with standard Power-On command for nearly all Sony components.) To program a new series of operations, clear the program first (see page 26). 2 Press SYSTEM CONTROL 2. All Component Select buttons light up. Example: To program the procedure for the video to the SYSTEM CONTROL 2 button 1 Press S (set). All Component Select buttons flash. 3 Press the Component Select button for the component to operate. The Component button lights up when you press it, and turns off when you release it. 24