Sony RM-VL900 Operating Instructions (primary manual) - Page 33

In this example, press the Number 5 button to select CD. 1: VCR 2: VD 3: SAT 4: AMP 5: CD 6: TAPE 7: MD 8: TV 9: CBL 0: DVD Note Only the function to this step is assigned. Other "learned" functions are not assigned. 4 •If you need to set the component code, follow the steps on pages 8 or 11. •If you need to program some signals by the Learning function, follow the Steps 1 and 3 to 7 on pages 15 to 17. To reset a Component Select button to its original setting 1 Press and hold S (set) for over 3 seconds. The S (set) indicator lights up, and all Component Select buttons flash. 2 While holding x pressed, press the desired Component Select button. The S (set) indicator turns off, and the selected Component button lights up. Note Through this operation, you can only erase the "learned" functions to all buttons on a specific component and the Channel Macro function. The "learned" functions to the Component Select buttons cannot be changed here. You must be sure beforehand, of which "learned" function you want to erase. 3 Press S (set) to finish setting. Continued 33