Sony RM-VL900 Operating Instructions (primary manual) - Page 38

Transferring Data between Remote Commanders You can transfer the data, such as "learned" signals and component code settings, between this Commander and another Sony RM-VL900 or a Sony RM-AV2100 remote commander. If you want to exchange data with a Sony RM-AV2100 Refer to "Data Transfer" instructions in the RM-AV2000 manual for the necessary procedures. Note on remote commanders You can transfer data between remote commanders with the mark. Other remote controls cannot be used to transfer data. 2 Press and hold S (set) for more than 3 seconds. The S (set) indicator lights up, and all Component Select buttons flash. 3 While holding cursor v pressed, press the Number 1 button. The S (set) indicator flashes and all Component Select buttons light up. Transferring the data You can transfer all data of this Commander or the data of a Component Select button on this Commander to another Sony RM-VL900 or RM-AV2100. To transfer all data of the Commander 1 Place the RM-VL900 head to head with another remote commander. Another remote commander about 2 - 4 inches (5 - 10 cm) away RM-VL900 38