Sony RM-VL900 Operating Instructions (primary manual) - Page 49
While holding POWER pressed, press TV/VIDEO and VOL, until the Commander reacts as follows. - manual
View all Sony RM-VL900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
If none of the above have solved your problems, try the following before contacting any Customer Support. To reset the Commander to its factory settings While holding POWER pressed, press TV/VIDEO and VOL - until the Commander reacts as follows. The S (set) indicator and all Component Select buttons light up. Then the Component buttons turn off one by one, followed by the S (set) indicator. When all have turned off, all settings are cleared, and the Commander returns to its original state (including the preset series of functions on SYSTEM CONTROL 1 and 3). For the customers in the U.S.A Customer Support Information After you have read through this manual, if you still cannot get the Remote Commander to work properly, call the Sony Customer Support Helpline at 1-800-822-2217. 49