Sony RM-VL900 Operating Instructions (primary manual) - Page 30

Executing a Series of Commands - System Control Function (continued) For the Component Select buttons 1 Press S (set). All Component Select buttons flash. 2 While holding one of the Component Select buttons whose interval you want to change pressed, press one of the Number buttons (1 - 4) to select the interval. The Component Select button lights up when you press these buttons, and turns off when you release them. Adding an Extra Function to the Component Select Buttons Programming the Power-On Command of the Selected Component (for Sony Components only) When using Sony components, you can program the Power-On signal for each component on a Component Select button. You can select the desired component and power it on by just pressing that Component Select button. Example: To program the TV button 1 Press S (set). All Component Select buttons flash. Note If you press a Number button apart from 1 - 4, the S (set) indicator flashes twice, and the Commander returns to its state in Step 1. Be sure to select from 1 - 4. 30