Sony RM-VL900 Operating Instructions (primary manual) - Page 34

Assigning Other Components to the Component Select Buttons (continued) Copying the settings of a Component Select button to another button You can copy the entire settings of a Component Select button to another Component Select button. The settings of the component code (page 8), the Channel Macro function (page 43), and the "learned" function (page 15) are copied to a new button. Note You cannot copy the settings to a Component Select button on which any "learned" function or Channel Macro function has been programmed. Example: To copy the settings of the CD button to the VCR button 1 Press S (set). All Component Select buttons flash. 2 Press and hold for over 3 seconds the desired Component Select button to which you want to copy a setting from another component. The selected Component button lights up, and all other buttons flash rapidly. 3 Keep holding down this Component button, and press the Component button that holds the setting you want to copy. Both Component buttons light up when you press them, and turn off when you release them. At this point, all settings for CD are imported to VCR. 34