Sony SLV-D380P Instruction Manual - Page 92

Recording, Timer recording, Others, Symptom, Remedy

Page 92 highlights

Recording Symptom Remedy The picture from a connected cable box or satellite receiver does not appear on the TV screen. • Make sure the TV or monitor is set to video input. • Select the correct line input (L1 or L2) which the cable box or satellite receiver is connected with the INPUT SELECT button. The tape starts playing as soon as it is • The safety tab has been removed. To record on this tape, inserted. cover the tab hole. The tape is ejected when you press • Check that the safety tab has not been removed. z REC. Nothing happens when you press z REC. • Make sure the tape is not at its end. The timer does not operate. • Check that the clock is set. • Make sure a tape has been inserted. • Check that the safety tab has not been removed. • Make sure the tape is not at its end. • Make sure a program has been set for timer recording. • Make sure your timer settings are past the current time. • Check that the cable box or satellite receiver is turned on. • The clock stops if the DVD-VCR is disconnected from the wall outlet for more than one minute. Reset the clock and timer. • Turn the power off and unplug the AC power cord. A tape cannot be inserted. • Check that a tape is not already in the tape compartment. Control by AV mouse is not possible. • The unit is not compatible with satellite TV receiver AV mouse, etc. Timer recording Others 92US Troubleshooting

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116

92
US
Troubleshooting
Recording
The picture from a connected cable
box or satellite receiver does not
appear on the TV screen.
Make sure the TV or monitor is set to video input.
Select the correct line input (L1 or L2) which the cable
box or satellite receiver is connected with the INPUT
SELECT button.
The tape starts playing as soon as it is
inserted.
The safety tab has been removed. To record on this tape,
cover the tab hole.
The tape is ejected when you press
z
REC.
Check that the safety tab has not been removed.
Nothing happens when you press
z
REC.
Make sure the tape is not at its end.
Timer recording
The timer does not operate.
Check that the clock is set.
Make sure a tape has been inserted.
Check that the safety tab has not been removed.
Make sure the tape is not at its end.
Make sure a program has been set for timer recording.
Make sure your timer settings are past the current time.
Check that the cable box or satellite receiver is turned on.
The clock stops if the DVD-VCR is disconnected from
the wall outlet for more than one minute. Reset the clock
and timer.
Turn the power off and unplug the AC power cord.
Others
A tape cannot be inserted.
Check that a tape is not already in the tape compartment.
Control by AV mouse is not possible.
The unit is not compatible with satellite TV receiver AV
mouse, etc.
Symptom
Remedy