Sony STR-DA2100ES Operating Instructions for STRDA2100ES

Sony STR-DA2100ES - Am/fm Es Stereo Receiver Manual

Get Sony STR-DA2100ES - Am/fm Es Stereo Receiver PDF manuals and user guides View all Sony STR-DA2100ES manuals
Add to My Manuals
Save this manual to your list of manuals

Sony STR-DA2100ES manual content summary:

  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 1
    AM Receiver Operating Instructions Owner's Record The model and serial numbers are located on the rear of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. Serial No. STR-DA2100ES ©2005 Sony
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 2
    "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 3
    Manual • The instructions in this manual is for model STR-DA2100ES. Check your model number by looking at the lower right corner of the front panel. • The instructions in this manual describe the controls on the receiver. You can use the controls on the supplied remote (INPUT ONLY) R IN IN PHONO
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 4
    with multi channel output jacks........ inputs ........ 44 Changing the command mode of the receiver 45 Using the Sleep Timer 45 Selecting the speaker system 46 Recording 46 Listening to the sound in another zone 47 Operations Using the Remote RM-AAE001 Before you use your remote 49 Remote
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 5
    channel audio outputb) With analog audio output onlyc) TV monitor With component video inputd) With S-Video or composite video input is used to output the audio decoded by the component's internal multi channel decoder through this receiver. c) Model equipped only with AUDIO OUT L/R jacks, etc. d)
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 6
    Required cords The hookup diagrams on the subsequent pages assume the use of the following optional connection cords (A to H) (not supplied). A Audio cord White (L) Red (R) B Audio/video cord Yellow (video) White (L/audio) Red (R/audio) C Video cord Yellow D S-video cord E Optical digital cord F
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 7
    CD IN COAXIAL SIGNAL GND L ASSIGNABLE (INPUT ONLY) R IN IN PHONO SA-CD/CD R R R AUDIO IN AUDIO IN AUDIO OUT AUDIO IN AUDIO OUT AUDIO IN TV/SAT DVD VIDEO 2 VIDEO 1 L L L CENTER L IR IR TRIGGER OUT IN OUT IR REMOTE receiver. In this case, do not connect
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 8
    COAXIAL SIGNAL GND L ASSIGNABLE (INPUT ONLY) R IN IN PHONO SA-CD/CD R R R AUDIO IN AUDIO IN AUDIO OUT AUDIO IN AUDIO OUT AUDIO IN TV/SAT DVD VIDEO 2 VIDEO 1 L L L CENTER L IR IR TRIGGER OUT IN OUT IR REMOTE converted upward on this receiver and then output
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 9
    PHONO SA-CD/CD R R R AUDIO IN AUDIO IN AUDIO OUT AUDIO IN AUDIO OUT AUDIO IN TV/SAT DVD VIDEO 2 VIDEO 1 L L L CENTER L IR IR TRIGGER OUT IN OUT IR REMOTE receiver. Connect to the analog input jacks (SA-CD/CD IN jacks). Refer to the operating instructions supplied with the Super Audio
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 10
    DVD or Super Audio CD player is equipped with multi channel output jacks, you can connect it to this receiver's MULTI CH IN jacks to enjoy the multi channel sound. Alternatively, the multi channel input jacks can be used to connect an external multi channel decoder. For details on the required cords
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 11
    COAXIAL SIGNAL GND L ASSIGNABLE (INPUT ONLY) R IN IN PHONO SA-CD/CD R AUDIO IN AUDIO IN TV/SAT DVD R AUDIO OUT AUDIO IN VIDEO 2 R AUDIO OUT AUDIO IN VIDEO 1 L L L CENTER L IR IR TRIGGER OUT IN OUT IR REMOTE converted upward on this receiver and then output
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 12
    COAXIAL SIGNAL GND L ASSIGNABLE (INPUT ONLY) R IN IN PHONO SA-CD/CD R R REMOTE 4Ω 8Ω R OUT IN MD/TAPE R R SURR FRONT SURROUND BACK MULTI CH IN SUB WOOFER R SUB OUT WOOFER 2ND ZONE PRE OUT IMPEDANCE SELECTOR RS232C + - CENTER SPE l l A OUTPUT LINE L R OUT A IN A INPUT
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 13
    remote. For details on the required cords (A-H), see page 6. VCR INPUT OUTPUT VIDEO VIDEO IN OUT AUDIO AUDIO IN OUT L R B B OUT IN TV monitor INPUT VIDEO INPUT S VIDEO CD L L To the VIDEO 3 INPUT COAXIAL SIGNAL GND L ASSIGNABLE (INPUT ONLY) R IN IN PHONO SA-CD/CD R AUDIO IN
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 14
    SIGNAL GND L ASSIGNABLE (INPUT ONLY) R IN IN PHONO SA-CD/CD R R R AUDIO IN AUDIO IN AUDIO OUT AUDIO IN AUDIO OUT AUDIO IN TV/SAT DVD VIDEO 2 VIDEO 1 L L L CENTER L IR IR TRIGGER OUT IN OUT IR REMOTE loop antenna away from the receiver and other components. • Be
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 15
    Getting Started 3: Connecting speakers Connect your speakers to the receiver. This receiver allows you to use a 7.1 channel speaker system. To fully enjoy theater-like multi channel surround sound requires five speakers (two front speakers, a center speaker, and two surround speakers) and a sub
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 16
    R AUDIO OUT AUDIO IN VIDEO 1 IR IR TRIGGER OUT IN OUT IR REMOTE CENTER L 4Ω 8Ω SUB WOOFER R SUB OUT WOOFER 2ND ZONE PRE OUT IMPEDANCE SPEAKERS FRONT B* SWITCHED 120W/1A MAX AC 120V 60Hz AC OUTLET e B A INPUT AUDIO IN E A E A E e e Sub woofer Center speaker Surround back
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 17
    channel surround, connect speakers with a nominal impedance of 8 ohms or higher to the FRONT, CENTER, SURROUND and SURROUND BACK terminals, and set the IMPEDANCE SELECTOR to "8Ω". Use the screwdriver to set the impedance selector to the correct position. Refer to the operating instructions receiver,
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 18
    for the operation. 1 Press ?/1 to turn off the receiver. 2 Hold down ?/1 for 5 seconds. "PUSH ENTER" flashes in the display. 3 Press ENTER. "MEMORY CLEARING" appears in the display for a while, then "MEMORY CLEARED" appears. The following are reset to their factory settings. • MASTER VOLUME. • All
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 19
    speakers (if set to "LARGE") or sub woofer.a) • NO If you did not connect a center speaker, select "NO". The sound of the center channel will be output from the front speakers.b) x SURR SP XXXXX (Surround speakers size) • LARGE If you connect large speakers that will effectively reproduce bass
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 20
    " and "SMALL" settings for each speaker determine whether the internal sound processor will cut the bass signal from that channel. When the bass is cut from a channel, the bass redirection circuitry sends the corresponding bass frequencies to the sub woofer or other "LARGE" speakers. However, since
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 21
    receiver lets you to input remote for the operation. Tip The receiver employs a test tone with a frequency centered at 800 Hz. 1 Press ?/1 to turn on the receiver the same time, press MASTER VOL +/- on the remote or turn MASTER VOLUME -/+ on the receiver. • The adjusted value are shown in the display
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 22
    the LEVEL menu (when the test tone is output, the receiver switches to the LEVEL menu automatically), we recommend you follow the procedure described above and adjust the speaker levels from your listening position using the remote. To output the test tone only from a specific speaker Set "TEST
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 23
    , set the TV's video input to match the component you selected. 3 Turn MASTER VOLUME -/+ to adjust the volume. Note To avoid damaging your speakers, make sure that you turn down the volume before you turn off the receiver. To mute the sound Press MUTING on the remote. The muting function will be
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 24
    DECODING indicator lights up when the receiver is decoding multi channel sources. However, this indicator does not light up if you select 2CH STEREO mode. Listening to FM/AM radio You can listen to FM and AM broadcasts through the built-in tuner. Before operation, make sure you have connected the
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 25
    enter the frequency of the station you want directly. Use the remote for the operation. 1 Move the easy scroll key (PUSH) to select TUNER. you often listen to. Presetting radio stations 1 Turn INPUT SELECTOR to select the FM or AM band. The last received station is tuned in. 2 Tune in the station
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 26
    in the display. Press DISPLAY repeatedly. Each time you press DISPLAY, the display will change cyclically as follows. Index name of the input* t Selected input t Sound field currently applied t Volume level When the tuner is selected Preset station name* t Frequency t Sound field currently applied
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 27
    being played back contains the LFE (Low Frequency Effect) channel and the LFE channel signal is actually being reproduced. C SP.A/SP.B: receiver to tune in radio stations, etc. See pages 24-26 for tuner operations. L D.ASSIGN: Lights up when the digital assign function is used for the selected input
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 28
    " is selected. P SLEEP: Lights up when sleep timer is activated. Q Playback channel indicators: The letters (L, C, R, etc.) indicate the channels being played back. The boxes around the letters vary to show how the receiver downmixes the source sound (based on the speakers settings). L (Front Left
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 29
    can switch the audio of the selected input to the two channel analog input. This function enables you to enjoy high quality analog sources. When using this function, only the volume and front speaker balance can be adjusted. 1 Turn INPUT SELECTOR to select the input you want to listen to in analog
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 30
    to the sub woofer. Press A.F.D. repeatedly to select "A.F.D. AUTO". The receiver automatically detects the type of audio signal being input and performs the proper decoding if necessary. Enjoying stereo sound in multi channel (2 channel decoding mode) This mode lets you specify the type of decoding
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 31
    When the audio signal is 2 channel stereo or if the source signal does not include a LFE signal, the receiver generates a low frequency signal for DCS Reproduces the sound characteristics of the Sony Pictures Entertainment "Cary Grant Theater" cinema production studio. This is a standard mode, great
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 32
    the sound characteristics of the Sony Pictures Entertainment "Kim Novak Theater" cinema production studio. This mode is channel surround effects. You can reproduce the sound characteristics of Sony a pair of headphones while a sound field is operating, the system will automatically switch to "HP 2CH"
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 33
    repeatedly to select "A.F.D. AUTO". Tips • The receiver lets you apply the last selected sound field to an input whenever it is selected (Sound Field Link). channel input stream. By decoding the surround back signal of DVD software (etc.) recorded in Dolby Digital EX, DTS-ES Matrix, DTS-ES
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 34
    and Dolby Digital EX or Dolby Pro Logic IIx is applied when the output channel is 7.1. Input stream Dolby Digital 5.1 Dolby Digital EXb) DTS 5.1 DTS-ES Matrix 6.1c) DTS-ES Discrete 6.1d) Output channel 6.1e) 6.1e) 6.1e) 6.1e) 6.1e) Applied surround back decoder Matrix decoder conforms to Dolby
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 35
    the receiver. Then, assign the DVD COAXIAL's digital audio input to DVD (DVD-DVD) and the TV/SAT OPTICAL's digital audio input to VIDEO inputs to the same input. • You cannot use the audio input for the original input when it is assigned to another input. • When you assign the audio input, the INPUT
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 36
    MODE You can switch the audio input mode for components which have digital audio input jacks. 1 Turn INPUT SELECTOR to select the input. 2 Press INPUT MODE repeatedly to select the audio input mode. The selected audio input mode appears in the display. Audio input modes • AUTO 2CH Gives priority to
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 37
    for effect level parameter. The effect level parameter settings are stored individually for each sound field. 1 Start playing a source encoded with multi channel surround effects (DVD, etc.). 2 Press MAIN MENU repeatedly to select " LEVEL ". 3 Turn MENU to select the parameter you want to adjust
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 38
    Use the buttons on the receiver for the operation. 1 Press ?/1 to turn the equalizer. 1 Start playing a source encoded with multi channel surround effects (DVD, etc.). 2 Press MAIN MENU the receiver is decoding signals with a sampling frequency of more than 48 kHz, or when DTS 96/24, DTS-ES Matrix
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 39
    , Dolby Digital, or PCM. • PCM PCM signals are given priority (to prevent the interruption when playback starts). Even when other signals are input, the sound is output. However, this receiver cannot decode DTS-CD when set to "DEC. PRI. PCM". Note When set to "DEC. PRI. AUTO" and the sound from the
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 40
    in 3 steps. • 0 (0%) • 40 (40%) • 70 (70%) x NAME XXXX XXXX (Naming preset stations and inputs) Lets you set the name of preset stations and inputs selected with INPUT SELECTOR. For details, see "Naming preset stations and inputs" on page 44. Advanced SP SET UP menu parameters When "MENU EXP." is
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 41
    left and right. Therefore, although it may result in a setting contrary to the above explanation, we recommend that you playback multi channel surround encoded software and select the setting that provides a good sense of spaciousness and that best succeeds in forming a cohesive space between
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 42
    (Dynamic range compressor) Lets you compress the dynamic range of the sound track. This may be useful when you want to watch movies at low volumes late at night. • OFF The dynamic range is not compressed. • STD The dynamic range is compressed as intended by the recording engineer. • MAX The dynamic
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 43
    on or off the output of 12V triggers manually by the CIS command of the IR remote or RS232C control. • ZONE Lets you turn on output of 12V triggers when the main receiver is turned on. • INPUT Lets you turn on output of 12V triggers when the main receiver is turned on, depending on the setting
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 44
    Other Operations Naming preset stations and inputs You can enter a name of up to 8 characters for preset stations and inputs selected with INPUT SELECTOR, and display it in the receiver's display. To index a preset station 1 Turn INPUT SELECTOR to select tuner ("FM" or "AM"). 2 Press FM/AM to select
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 45
    is "AV2". • If the command mode of the receiver and the remote is different, you cannot use the remote to operate the receiver. Using the Sleep Timer You can set the receiver to turn off automatically at a specified time. Use the remote for the operation. 1 Press ALT to light up the button. 2 Press
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 46
    You can record on a cassette tape or MiniDisc using the receiver. See the operating instructions of your cassette deck or MD deck if you need help. being used. The analog audio signals of the current or previously used input are output. • Some sources contain copy guards to prevent recording. In
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 47
    receiver. You can also add audio from a variety of audio sources when editing a video tape. See the operating instructions signals of the current or previously used input are output. • Some sources contain copy zone. Press ?/1 on the remote while "2ND" appears in the remote display to turn on 2nd
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 48
    the current input are output. 2nd zone connections Main receiver Audio/video components STR-DA2100ES Using the surround back speakers for the 2nd zone Make sure that the surround back speakers selection parameter is set to "ZONE-2" (page 19). Use the remote for the following operation. 1 Hold down
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 49
    remote, point it at the remote sensor on the receiver. Tip Under normal conditions, the batteries should last for about 6 months. When the remote no longer operates the receiver mM - ANT CLEAR SEARCH MODE H X x TOP MENU/ GUIDE MUTING AV MENU F G g MASTER VOL f O DISPLAY TV VOL RETURN
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 50
    Satellite Multi channel TV Sound. tuner/Blu-ray disc recorder/ Hard disc recorder/PSX AV VCR/ Displays Remote Button Operations Function Display 3 Remote Shows the selected input, macro list and command mode of the remote. DISPLAY q; TV/VCR/ VCD player/ LD player/ DVD player/ Receiver
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 51
    deck TEST TONE Receiver 5 Outputs test tone. TOP MENU/ DVD player Displays DVD title. GUIDE q; Satellite tuner/ Displays guide menu. Blu-ray disc recorder/ Hard disc recorder/PSX * Only for Sony TVs with the picture-in-picture function. continued 51US Operations Using the Remote RM-AAE001
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 52
    Remote Button Operations Function TV CH +/- TV qs Selects preset TV channels. TV/VIDEO TV qg Selects input signal: TV input or video input. TV VOL TV +/- qa Adjusts the volume of the TV. TV ?/1 1 TV Turns the TV on or off. WIDE qd TV Selects the wide picture mode. 1-9 5 and Receiver 0/10
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 53
    Using the Remote RM-AAE001 Remote Button x ql V/v q; B/b q; V/v/B/b q; O q; Operations Function VCR/ CD player/ VCD player/ LD player/ DVD player/ MD deck/ DAT deck/ Tape deck/ Blu-ray disc recorder/ Hard disc recorder/PSX Stops playback. Receiver Selects a menu item. Receiver Adjusts or
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 54
    of your system. Furthermore, you can also program the remote for Sony components that the remote is unable to control. Note that the remote can only control components that accept infrared wireless control signals. 1 Hold down RM SET UP and press AV ?/1. The indicator lights up and "IR SET" appears
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 55
    memory of the remote To clear all programmed and learned signals, do the following to reset the remote to factory settings. Press ?/1, AV ?/1 and MASTER VOL the input buttons on this remote may not be available when used with your particular component. To control a CD player Maker SONY DENON JVC
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 56
    209 210 216 211, 212 213, 214 215, 216 217, 218 To control an LD player Maker SONY PIONEER Code(s) 601, 602, 603 606 To control a video CD player Maker SONY Code(s) 605 To control a VCR Maker SONY AIWA* BLAUPUNKT EMERSON GENERAL ELECTRIC HITACHI JVC MAGNAVOX NEC PANASONIC PHILIPS PIONEER RCA
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 57
    learn an operation for a CD player, select SA-CD. 3 Press PUSH. 4 Press the button you want to use for the Learning function. The indicator turns off while a valid button is pressed, then flashes slowly. 5 Point the remote control code receiver section of the remote towards the receiver/transmitter
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 58
    all programmed and learned signals, do the following to reset the remote to factory settings. Press ?/1, AV ?/1 and MASTER VOL - at the same time. The indicator flashes 3 times, then goes off. To use a command that has been learned When selecting a learned input, press the learned button for that
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 59
    1. The indicator flashes slowly. 4 Point the remote control code receiver section of the remote towards the receiver/transmitter on the remote control to be learned. 5 Press the appropriate button on the remote control to be learned to send the remote button code. Lightly pressing the button once
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 60
    dealer. • AC power cord must be changed only at the qualified service shop. On heat buildup Although the receiver heats up during operation, this is not a malfunction. If you continuously use this receiver at a large volume, the cabinet temperature of the top, side and bottom rises considerably. To
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 61
    following difficulties while using the receiver, use this troubleshooting guide to help you remedy the problem. There is no sound or channel sources. • Check that the DIGITAL ASSIGN function is not used to assign the audio input of other input to the selected input (page 35). • Check that the INPUT
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 62
    of more than 48 kHz. Dolby Digital or DTS multi channel sound is not reproduced. • Check that the playing DVD, etc. is recorded in Dolby Digital or DTS format. • When connecting the DVD player, etc. to the digital input jacks of this receiver, check the audio setting (settings for the audio output
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 63
    sure you select the correct input on the remote. • To activate the buttons with orange printing, press ALT first before pressing the buttons. • Before you use the V/v/B/b button for receiver operation, press MAIN MENU. To operate other components, press TOP MENU/GUIDE or AV MENU after pressing the
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 64
    With 8 ohm loads, both channels driven, from 20 - 20,000 Hz; rated 110 watts per channel minimum RMS power, with no equalization curve ±0.5 dB 10 Hz - 100 kHz +0.5/-2 dB (with sound field and equalizer bypassed) Inputs (Analog) PHONO MULTI CH IN, SA-CD/CD, TV/SAT, MD/TAPE, DVD, VIDEO 1, 2, 3
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 65
    AM station, turn off the receiver. While holding down PRESET TUNING or 9 kHz), repeat the procedure. Video section Inputs/Outputs Video: S-video: COMPONENT VIDEO: 1 controls Mass (Approx.) 14.0 kg (30 lb 14 oz) Supplied accessories FM wire antenna (1) AM loop antenna (1) AC power cord (1) Remote
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 66
    8 (36, 45) INPUT SELECTOR qs (23, 24, 25, 36, 40, 44, 62) IR (receptor) 1 (49, 63) M - O MAIN MENU 3 (18, 37, 38, 44) 12 3 4 MASTER VOLUME -/+ 9 (21, 23, 61) MEMORY/ENTER 4 (25, 35, 36, 43, 44) MENU wf (18, 37, 38, 44) MOVIE qf (31, 32, 62) MULTI CHANNEL DECODING (indicator) 6 (24) MULTI CH
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 67
    37, 42 SP SET UP parameters 18, 40 speaker level and balance 21 Automatic tuning 24 C Changing display 26 CIS 43 CIS menu 43 Clearing receiver's memory 18 CUSTOMIZE menu 39 D Digital Cinema Sound 31 Direct tuning 25 Dual Mono 40 Dubbing. See Recording E Editing. See Recording EQUALIZER menu 38
  • Sony STR-DA2100ES | Operating Instructions for STRDA2100ES - Page 68
    Sony Corporation Printed in Malaysia
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
©2005 Sony Corporation
2-580-805-
13
(1)
FM Stereo
FM/AM Receiver
Operating Instructions
Owner’s Record
The model and serial numbers are located on the rear of the unit. Record the serial
number in the space provided below. Refer to them whenever you call upon your
Sony dealer regarding this product.
Model No.
Serial No.
STR-DA2100ES