Sony STR-DA2100ES Operating Instructions for STRDA2100ES - Page 64
Specifications, AUDIO POWER SPECIFICATIONS
View all Sony STR-DA2100ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (Models of area code U only) With 8 ohm loads, both channels driven, from 20 - 20,000 Hz; rated 110 watts per channel minimum RMS power, with no more than 0.09% total harmonic distortion from 250 milliwatts to rated output. Amplifier section Power output Models of area code U, CA Rated Power Output at Stereo Mode (8 ohms 20 Hz - 20 kHz, THD 0.09%) 110 W + 110 W1) (8 ohms 1 kHz, THD 0.7%) 120 W + 120 W1) (8 ohms 1 kHz, THD 10%) 150 W + 150 W1) Reference Power Output1) (8 ohms 20 Hz - 20 kHz, THD 0.09%) FRONT2): 110 W/ch CENTER2): 110 W SURR2): 110 W/ch SURR BACK2): 110 W/ch (8 ohms 1 kHz, THD 0.7%) FRONT2): 120 W/ch CENTER2): 120 W SURR2): 120 W/ch SURR BACK2): 120 W/ch (8 ohms 1 kHz, THD 10%) FRONT2): 150 W/ch CENTER2): 150 W SURR2): 150 W/ch SURR BACK2): 150 W/ch 1) Measured under the following conditions: 120 V AC, 60 Hz 2) Depending on the sound field settings and the source, there may be no sound output. Frequency response PHONO MULTI CH IN, SA-CD/CD, TV/SAT, MD/TAPE, DVD, VIDEO 1, 2, 3 RIAA equalization curve ±0.5 dB 10 Hz - 100 kHz +0.5/-2 dB (with sound field and equalizer bypassed) Inputs (Analog) PHONO MULTI CH IN, SA-CD/CD, TV/SAT, MD/TAPE, DVD, VIDEO 1, 2, 3 Sensitivity: 8 mV Impedance: 50 kiloohms S/N3): 86 dB (A, 8 mV4)) Sensitivity: 500 mV Impedance: 50 kiloohms S/N3): 96 dB (A, 500 mV4)) 3) INPUT SHORT (with sound field and equalizer bypassed). 4) Weighted network, input level. Inputs (Digital) DVD, SA-CD/CD (Coaxial) TV/SAT, SA-CD/CD, MD/TAPE, VIDEO 3 (Optical) Sensitivity: - Impedance: 75 ohms S/N: 100 dB (A, 20 kHz LPF) Sensitivity: - Impedance: - S/N: 100 dB (A, 20 kHz LPF) Outputs (Analog) MD/TAPE (OUT), VIDEO 1, 2 (AUDIO OUT) SUB WOOFER Voltage: 500 mV Impedance: 10 kiloohms Voltage: 2 V Impedance: 1 kiloohms Outputs (Digital) MD/TAPE (Optical) Sensitivity: - Equalizer Gain levels ±10 dB, 0.5 dB step 64US