Sony STR-DA2100ES Operating Instructions for STRDA2100ES - Page 18
: Setting up the speakers, Performing initial setup, operations, Speaker setup parameters
View all Sony STR-DA2100ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Performing initial setup operations Before using the receiver for the first time, initialize the receiver by performing the following procedure. This procedure can also be used to return settings you have made to their factory defaults. Use the buttons on the receiver for the operation. 1 Press ?/1 to turn off the receiver. 2 Hold down ?/1 for 5 seconds. "PUSH ENTER" flashes in the display. 3 Press ENTER. "MEMORY CLEARING" appears in the display for a while, then "MEMORY CLEARED" appears. The following are reset to their factory settings. • MASTER VOLUME. • All settings in the SP SET UP, LEVEL, EQUALIZER, CUSTOMIZE, TUNER and CIS menus. • The sound field memorized for each input and preset station. • All preset stations. • All index names for inputs and preset stations. 5: Setting up the speakers You can use the SP SET UP menu to set the size, distance and location of the speakers connected to this receiver. 1 Press ?/1 to turn on the receiver. 2 Press MAIN MENU repeatedly to select " SP SET UP ". 3 Turn MENU to select the parameter you want to adjust. For details, see "Speaker setup parameters" below. Note Some speaker setup items may appear dimmed in the display. This means that they have been adjusted automatically due to other speaker settings or may not be adjustable. 4 Turn -/+ to select the setting you want. The setting is entered automatically. 5 Repeat steps 3 and 4 until you have set all of the items that follow. Speaker setup parameters The initial settings are underlined. x EASY SETUP XXX (Speaker easy setup) • YES If you want to set up your speakers automatically, select "YES". You can select a pre-defined speaker pattern (see the supplied "Easy Setup Guide"). • NO If you want to adjust the settings of each speaker manually, select "NO". x SP PATTERN X-X (Speaker setup pattern) When "EASY SETUP" is set to "YES", select the speaker setup pattern. Turn -/+ to select the speaker setup pattern and press MEMORY/ ENTER to enter the selection. Check your speaker pattern using the supplied "Easy Setup Guide". 18US