Sony STR-DA2100ES Operating Instructions for STRDA2100ES - Page 27

Amplifier Operation About the indications in the display 12 3 4 56 7 8 9 q; qa SP.A SP.B SW LFE SLEEP LCR SL S SR qh SBL SB SBR MULTI CH IN A.DIRECT qg EQ D.RANGE ;DIGITAL EX DTS-ES ;PRO LOGIC IIx 96/24 NEO:6 qf qd qj OPT COAX MONO MEMORY D.ASSIGN STEREO qs A SW: Lights up when sub woofer selection is set to "YES" (page 19) and the audio signal is output from the SUB WOOFER jacks. B LFE: Lights up when the disc being played back contains the LFE (Low Frequency Effect) channel and the LFE channel signal is actually being reproduced. C SP.A/SP.B: Lights up in accordance with the speaker system being used (A or B). Turns off when speaker output is turned off or when headphones are connected. D MULTI CH IN: Lights up when "MULTI CH IN" is selected. E EQ: Lights up when the equalizer is activated. F D.RANGE: Lights up when dynamic range compression is activated (page 42). G ; DIGITAL EX: "; DIGITAL" lights up when Dolby Digital signals are input. "; DIGITAL EX" lights up when Dolby Digital EX signals are input. Note When playing a Dolby Digital EX format disc, be sure that you have made digital connections and that INPUT MODE is not set to "ANALOG FIXED" (page 36). H DTS-ES 96/24: "DTS" lights up when DTS signals are input. "DTS-ES" lights up when DTS-ES signals are input. "DTS 96/24" lights up when the receiver is decoding DTS 96 kHz/ 24 bit signals. Note When playing a DTS format disc, be sure that you have made digital connections and that INPUT MODE is not set to "ANALOG FIXED" (page 36). I OPT: Lights up when the source signal is a digital signal being input through the OPTICAL terminal or when INPUT MODE is set to "OPT FIXED" (page 36). J COAX: Lights up when the source signal is a digital signal being input through the COAXIAL terminal or when INPUT MODE is set to "COAX FIXED" (page 36). K Tuner indicators: Lights up when using the receiver to tune in radio stations, etc. See pages 24-26 for tuner operations. L D.ASSIGN: Lights up when the digital assign function is used for the selected input. M NEO:6: Lights up when DTS Neo:6 Cinema/ Music mode decoding is activated. However, this indicator does not light up if both the center and surround speakers are set to "NO". continued 27US