Sony STR-DA2100ES Operating Instructions for STRDA2100ES - Page 65

FM tuner Video General, Supplied accessories, Area code, Power consumption

Get Sony STR-DA2100ES - Am/fm Es Stereo Receiver PDF manuals and user guides View all Sony STR-DA2100ES manuals
Add to My Manuals
Save this manual to your list of manuals

Page 65 highlights

Additional Information FM tuner section Tuning range 87.5 - 108.0 MHz Antenna FM wire antenna Antenna terminals 75 ohms, unbalanced Intermediate frequency 10.7 MHz Sensitivity Mono: 18.3 dBf, 2.2 µV/75 ohms Stereo: 38.3 dBf, 22.5 µV/75 ohms Useable sensitivity 11.2 dBf, 1 µV/75 ohms S/N Mono: 76 dB Stereo: 70 dB Harmonic distortion at 1 kHz Mono: 0.3% Stereo: 0.5% Separation 45 dB at 1 kHz Frequency response 30 Hz - 15 kHz, +0.5/-2 dB Selectivity 60 dB at 400 kHz AM tuner section Tuning range With 10-kHz tuning scale: 530 - 1,710 kHz5) With 9-kHz tuning scale: 531 - 1,710 kHz5) Antenna Loop antenna Intermediate frequency 450 kHz Usable sensitivity 50 dB/m (at 1,000 kHz or 999 kHz) S/N 54 dB (at 50 mV/m) Harmonic distortion 0.5% (50 mV/m, 400 Hz) Selectivity At 9 kHz: 35 dB At 10 kHz: 40 dB 5) You can change the AM tuning scale to 9 kHz or 10 kHz. After tuning in any AM station, turn off the receiver. While holding down PRESET TUNING + or TUNING +, press ?/1. All preset stations will be erased when you change the tuning scale. To reset the scale to 10 kHz (or 9 kHz), repeat the procedure. Video section Inputs/Outputs Video: S-video: COMPONENT VIDEO: 1 Vp-p, 75 ohms Y: 1 Vp-p, 75 ohms C: 0.286 Vp-p, 75 ohms Y: 1 Vp-p, 75 ohms PB/CB/B-Y: 0.7 Vp-p, 75 ohms PR/CR/R-Y: 0.7 Vp-p, 75 ohms 80 MHz HD Pass Through General Power requirements 120 V AC, 60 Hz Power consumption Area code U CA Power consumption 310 W 420 VA Power consumption (during standby mode) 0.5 W (when "INST. MODE" in the CIS menu is set to "OFF") (page 43) AC outlets 2 switched, 120 W/1A MAX Dimensions (w/h/d) (Approx.) 430 × 160.5 × 398.5 mm (16 7/8 × 6 2/8 × 15 5/8 inches) including projecting parts and controls Mass (Approx.) 14.0 kg (30 lb 14 oz) Supplied accessories FM wire antenna (1) AM loop antenna (1) AC power cord (1) Remote commander RM-AAE001 (1) R6 (size-AA) batteries (2) For details on the area code of the component you are using, see page 3. Design and specifications are subject to change without notice. 65US

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
Additional Information
65
US
FM tuner section
Tuning range
87.5 - 108.0 MHz
Antenna
FM wire antenna
Antenna terminals
75 ohms, unbalanced
Intermediate frequency
10.7 MHz
Sensitivity
Mono:
18.3 dBf, 2.2 μV/75 ohms
Stereo:
38.3 dBf, 22.5 μV/75 ohms
Useable sensitivity
11.2 dBf, 1 μV/75 ohms
S/N
Mono:
76 dB
Stereo:
70 dB
Harmonic distortion at 1 kHz
Mono:
0.3%
Stereo:
0.5%
Separation
45 dB at 1 kHz
Frequency response
30 Hz – 15 kHz,
+0.5/–2 dB
Selectivity
60 dB at 400 kHz
AM tuner section
Tuning range
With 10-kHz tuning scale:
530 – 1,710 kHz
5)
With 9-kHz tuning scale:
531 – 1,710 kHz
5)
Antenna
Loop antenna
Intermediate frequency
450 kHz
Usable sensitivity
50 dB/m (at 1,000 kHz or
999 kHz)
S/N
54 dB (at 50 mV/m)
Harmonic distortion
0.5% (50 mV/m, 400 Hz)
Selectivity
At 9 kHz:
35 dB
At 10 kHz:
40 dB
5)
You can change the AM tuning scale to 9 kHz or 10
kHz. After tuning in any AM station, turn off the
receiver. While holding down PRESET TUNING +
or TUNING +, press
?/1
. All preset stations will be
erased when you change the tuning scale. To reset
the scale to 10 kHz (or 9 kHz), repeat the procedure.
Video section
Inputs/Outputs
Video:
1 Vp-p, 75 ohms
S-video:
Y: 1 Vp-p, 75 ohms
C: 0.286 Vp-p, 75 ohms
COMPONENT VIDEO:
Y: 1 Vp-p, 75 ohms
P
B
/C
B
/B-Y: 0.7 Vp-p,
75 ohms
P
R
/C
R
/R-Y: 0.7 Vp-p,
75 ohms
80 MHz HD Pass Through
General
Power requirements
120 V AC, 60 Hz
Power consumption
Power consumption (during standby mode)
0.5 W (when “INST.
MODE” in the CIS menu is
set to “OFF”) (page 43)
AC outlets
2 switched, 120 W/1A
MAX
Dimensions (w/h/d) (Approx.)
430 × 160.5 × 398.5 mm
(16 7/8 × 6 2/8 × 15 5/8
inches) including
projecting parts and
controls
Mass (Approx.)
14.0 kg (30 lb 14 oz)
Supplied accessories
FM wire antenna (1)
AM loop antenna (1)
AC power cord (1)
Remote commander RM-AAE001 (1)
R6 (size-AA) batteries (2)
Design and specifications are subject to change
without notice.
Area code
Power consumption
U
310 W
CA
420 VA
For details on the area code of the component you
are using, see page 3.