TEAC DR-H338i Manual for DR-H338i - Page 13
HDMI video/audio output terminal, Component video output terminals
View all TEAC DR-H338i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
ENGLISH < Adjust the video aspect ratio to match that of the TV (page 38). < This unit adopts analog copy protection features. If the unit is connected to a TV through a VCR (video cassette recorder), the resulting playback may be affected. Connect the unit directly to the TV. < In all cases, use the highest quality cables for the best possible picture. < Select proper setting in the VIDEO OUTPUT setup (page 40). G HDMI video/audio output terminal Use a commercially available HDMI cable to connect the unit to a HDMI compatible TV or monitor. < If the TV or monitor is equipped only with a DVI terminal, a suitable adaptor cable or adaptors should be used. Note that the TV connected in this way must be HDCP compatible. Also note that this connection outputs no sound. < Make sure that you read and understand the documentation provided with the HDMI component. E Component video output terminals Use commercially available component video cables to connect the unit to the component video inputs of a suitably equipped TV or monitor to enjoy a high-quality picture. Use these terminals in preference to composite video connections. < If the component video terminals are connected to a TV with progressive scan capabilities, the output can be set to match this (page 40). < Note that these terminals cannot be connected to high definition component terminals. HDMI video output formats < 480p (NTSC) or 576p (PAL) < 720p < 1080i < 1080p < See page 41 for further details on HDMI video output formats. To output audio from the HDMI terminal If the connected HDMI component is capable of inputting HDMI audio, digital audio can be output from the HDMI terminal. < Select "ALL" or "PCM only" in the DIGITAL AUDIO SETUP (page 39). < To enjoy the digital surround audio from DVD-Video discs, connect the HDMI terminal to a surround amplifier and set the DIGITAL AUDIO SETUP to "ALL" (page 39). F Composite video output terminal Use a commercially available RCA (pin) video cable to connect the unit to the composite video connector of a TV or monitor. Use this connection only if no other video connection method is available. 13