TEAC DR-H338i Manual for DR-H338i - Page 37
Settings (GENERAL SETUP), options within the menu item, and press the Enter button
View all TEAC DR-H338i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
ENGLISH Settings (Introduction) This chapter describes how to use the SETUP menu. Most settings and adjustments are required to be set when you first use the system. Using the SETUP menu, you can adjust the picture size, set a preferred language for audio, the OSD (On Screen Displays), and limit playback by children, etc. For the detail of each menu, see following pages. 3 Use the Cursor buttons to navigate the menus. 1 Turn on the unit, and the connected TV or monitor. If no cursor is visible on the screen, use the left and right buttons (g/t) to select a page. Use the up and down buttons (5/b) to highlight menu items within the selected page. Press the left button (g) to return to the upper menu. 4 Enter the menu item with the right Cursor button (t). < The SETUP menu is available only in the DISC Source mode or the USB Source mode. If another source is selected, press the SOURCE button to select the DISC Source or the USB Source. 2 Press the SETUP button. 5 Use the up and down Cursor buttons (5/b) to select the options within the menu item, and press the Enter button to confirm the entry. The setup menu appears on the screen. < To exit the setup mode, press the SETUP button again. < Although it is possible to enter the setup menu while playback is continuing (or in resume mode), not all menu functions will be available. To expand the number of available functions, press the Stop button (H) twice. Individual menu functions are described from the next page. Repeat steps 3 through 5 as required. 6 Press the SETUP button to exit the setup mode. 37