TEAC DR-H338i Manual for DR-H338i - Page 23

Listening to an iPod (1) 1 Press the SOURCE button to select "iPod". Pausing playback < You can also select iPod by pressing the iPod/USB button on the remote control unit once or twice. During playback, press the Play/Pause button (G/J). Playback stops at the current position. < To resume playback, press the Play/Pause button (G/J) again. 2 Insert the iPod into the dock. Skipping playback ENGLISH The iPod automatically turns on and starts playback from the iPod's music list. < When the iPod is inserted while a source other than iPod is selected, the iPod will turn on and enter the pause mode. < Make sure to use an appropriate dock adapter (see previous page). During playback, press the Skip buttons (.//) repeatedly until the desired song is found. < When the Skip button (.) is pressed during playback, the current song will be played from the beginning. If you want to play the previous songs, press the Skip button (.) twice or more. < The iPod is recharged when it is plugged into the dock and the DR-H338i is on. While the unit is on standby, the iPod is not recharged because the unit's power consumption is minimized to meet the regulation of IEA. Searching for a part of a song < When headphones are plugged into the iPod, sound comes from both the speakers and the headphones. < The video signal from a connected iPod is output only from the video output terminals of DR-H338i. Hold down During playback, hold down the Search button (m or ,) and release it when the part you want to listen to is found. 23