TEAC DR-H338i Manual for DR-H338i - Page 21
Recording a source, Dimmer, Muting, Adjusting the bass and treble, If the LOUDNESS function is
View all TEAC DR-H338i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
ENGLISH Recording a source You can record a source onto a CD or a cassette tape connected to the DIGITAL OUT terminal or the LINE OUT jacks. Adjusting the bass and treble You can change the bass and treble sound between "-5" to "+5". 1. Select a source to be recorded by pressing the SOURCE button. 2. Start recording. 1 If the LOUDNESS function is on, press the LOUDNESS button to turn it off. < The volume, and tone control (DVS, LOUDNESS and TONE) have no effect on the recording signals. < When the LOUDNESS function is on, the bass and treble sound level automatically set to "0". Dimmer 2 Press the TONE button repeatedly to select Bass or Treble. Press the DIMMER button to dim the display. Press the button again to cancel the dimmer function. Muting 3 Press the VOLUME buttons to adjust the sound level within 5 seconds. To mute the sound temporarily, press the MUTING button. Press the MUTING button again to restore the sound. < "MUTING" blinks on the display while muting is engaged. < If you change the volume when the sound is muted, it will be unmuted. The higher the treble number, the more the high frequencies are emphasized. The higher the bass number, the more the low frequencies are emphasized. 21