Toshiba 46XV645U Owner's Manual - English - Page 39

Chapter 6: Using the TV's features Adjusting the picture Selecting the picture mode You can select your desired picture settings from the following modes, as described below. Mode Picture Quality AutoView™ Automatically adjusts picture settings based on ambient light conditions and input signal content Sports Bright and dynamic picture Standard Standard picture settings Movie Lower contrast for darkened room Game Designed for playing a video game requiring split-second timing between the on-screen display and input from the controller PC Designed for viewing of PC tables and documents Note: • Because the AutoView mode automatically adjusts picture settings based on ambient light conditions and input signal content, some menus will be grayed out when it is selected. • PC mode is available for HDMI and PC inputs only (not displayed for other input sources). • Game mode cannot be turned on when the ANT/ CABLE input is selected. 1 From the PICTURE menu, highlight Picture Mode. 2 Press C or c to select the picture mode you prefer and press T. Note: The picture mode you select affects the current input only. You can select a different picture mode for each input. Adjusting the picture quality The picture quality you adjusted under a certain picture mode is saved to the picture mode of same name. Selection Pressing C Pressing c Backlight* darker lighter Contrast lower higher Brightness darker lighter Color paler deeper Tint reddish greenish Sharpness softer sharper * This feature adjusts the brightness of the entire screen. When in video mode and no signal is input, this will automatically be set to 0. (Settings are stored in memory.) Note: Some menus cannot be adjusted when the picture mode is set to AutoView or TheaterLock is set to On. To adjust the picture quality: 1 From the PICTURE menu, highlight picture quality you want to adjust (Backlight, Contrast, Brightness, Color, Tint, or Sharpness). 2 Once you select the desire item, press C or c to adjust the setting, as described in the table above and then press O. Note: The picture quality you adjusted affects the current input only. You can adjust the picture quality for each input and source for photo viewing. To revert to the factory defaults: 1 Select the picture mode you want to reset. 2 From the PICTURE menu, highlight Reset and press T. 3 A confirmation message will appear. Press C or c to select Yes, and then press T. 39