Toshiba Portege M100 User Manual - Page 148
Installing Memory Under Keyboard, Remove all cables connected to the computer. - satellite drivers
View all Toshiba Portege M100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 148 highlights
2 1 3 1 Optional Devices Removing the memory module 6. Seat the cover and secure its screw. 7. Replace the battery. Installing Memory Under Keyboard If you use the computer for a long time, the memory modules will become hot. In this case, let the memory modules cool to room temperature before you replace them. Follow these steps to install main memory module: 1. Set the computer to boot mode and turn off the power. Do not try to install a memory module under the following conditions. You can damage the computer and the module. a. The computer is turned on. b. The computer was shut down using the Stand by mode. c. Power to the optical disc drive has been turned on by the CD Power switch. 2. Remove all cables connected to the computer. 3. Turn the computer upside down and remove the battery, refer to Chapter 6, Power and Power-Up Modes. 4. Open LCD to 150~170 degrees angle. 5. Underneath the battery, use screw driver to push up the Keyboard cover; push it until all hooks are released. Remove the keyboard cover. 8-10 Satellite M100