Uniden BC250D English Owners Manual - Page 37
Channel Lockout
View all Uniden BC250D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
1:CONVENTIONAL by rotating the VFO and pressing E. 3. Select the channel number of the stored frequency to be delayed by rotating the VFO and pressing E. 4. Select 2:DELAY and press E. 5. Rotate the VFO to select 1:ON or 2:OFF and press E. 6. For Search mode, select 1:SERVICE OPTION / :CHAIN SEARCH/3:DELAY by rotating the VFO and pressing E, then set to 1:ON or 2:OFF the same way as the Scan mode setting. Channel Lockout You can lockout any channel so it is not checked during normal scanning. You can restore the channel to scanning when you wish. Lockout in Hold Mode 1. Press HOLD/MAN. 2. Select a channel. a. Enter the channel number using the keypad. b. Press HOLD/MAN again. CH/ FRQ HOLD/ MAN SCAN RSM SERVICE SEARCH MENU/BACK TRUNK L/O REVERSE . SELECT E --- OR --- C 001 141.5000 NFM Rotate the VFO up or down to change the channel. UNIDEN Group A 3. Press L/O to lockout the channel. L/O appears on the display. Lockout in Scanning Mode If the scanner keeps stopping on a particular channel due to noise or frequent transmissions, you may want to keep that channel from scanning. 1. Wait until the scanner stops on the channel. 2. Then press L/O. 3. The scanner immediately resumes scanning because the locked out channel is no longer in the scanning sequence. Lockout Tips Write down your locked-out channels and put in a convenient place in case you need to restore them. 33