Uniden BC250D English Owners Manual - Page 93
If you have internet access, you can visit - warranty
View all Uniden BC250D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Problem Suggestion APCO P25 CARD NOT INSTALLED appear when the scanner is turned ON. 1. Check to see if the P-25 Card is properly installed. Neither APCO P25 CARD INSTALLED nor APCO P25 CARD NOT INSTALLED appear when the scanner is turned ON. 1. Check to see if the P-25 Card Mode is 1:ENABLE or 2:DISABLE in the Menu mode. Scratchy or robotic sound is heard during communications. 1. Move to a location where the signal strength is strong. 2. Modulation accuracy of transmissions sent can be low. Digital communication is not heard. 1. Verify the accuracy of the frequencies of the P-25 system you are trying to monitor. 2. You might be in a dead-spot for the P-25 system you are trying to monitor. Check other locations in the area. DATA sound is heard at the beginning of digital communications. 1. APCO project 25 systems can send data before voice communication. 2. Data sound can be heard when signal strength is weak. Robotic sound is heard. 1. Check to see if the ENC message appears on the display. The scanner doesn't monitor encrypted voice communications. When CARD ERROR appears every 10 seconds while you are using P-25 Card. 1. Re-install the P-25 Card. If you still cannot get satisfactory results while using your scanner or if you want additional information, please call or write the Uniden Parts and Service Division. The address and phone number is listed in the warranty at the end of this manual. If you would like immediate assistance, please call Customer Service at (800)297-1023. If you have internet access, you can visit scanner.uniden.com for additional information. 89