Uniden BC250D English Owners Manual - Page 60
ID Scan Hold Feature, Trunked Search, ID Monitor Mode
View all Uniden BC250D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
ID Scan Hold Feature If you want to stop on a ID during ID M1-1:4128 scanning, press HOLD/MAN. 867.8375 NFM If you want to resume scanning, press ID Tag LIST Tag RSM. To directly access a specific channel: There are several ways to access a specific ID quickly. 1. Press HOLD/MAN. 2. By using the keypad or rotating the VFO, enter the ID location number (See page 51). 3. Press HOLD/MAN again. C1000 0000.0000 Bank 10 CH/ FRQ HOLD/ MAN RSM SCAN SERVICE SEARCH MENU/BACK TRUNK L/O REVERSE . SELECT E Trunked Search Once you have programmed all the frequencies for a trunked system, Search will let you immediately start hearing transmissions. Press SCAN, and select the bank(s) you wish to receive, just as you select banks in conventional scanning and ID scanning. Hint: Press and hold RSM for 2 seconds, the scanner will move to the next trunking bank. Talkgroups display differently in Motorola, EDACS and LTR systems. You should read the appropriate parts of this guide to understand the formats. The display indicates the bank and the type of trunked system you are monitoring. You can change this to display a bank tag by using the System Option menu. Regardless of the system, you won't know exactly who you are receiving until you listen for a while, or refer to frequency guides or internet sites such as www.bearcat1.com. Of course, figuring out who each ID represents is half the fun of TrunkTracking. Later, when you learn more about a system, you will want to store lists of talkgroups. Then you can scan specific agencies and users, and use the many other features your radio provides. ID Monitor Mode To enter Scan Hold mode for conventional system in the bank 56