Uniden BC250D English Owners Manual - Page 42
Frequency Skip, Storing Search Frequencies - reset
View all Uniden BC250D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
1. Press MENU/BACK. 2. Select 3:SYSTEM OPTION / SYSTEM OPTION 7:DATA SKIP by rotating the VFO 5:PC CONTROL and pressing E. 6:CLONE 7:DATA SKIP 3. Select 1:ON by rotating the VFO and pressing E. When Data Skip is active, your scanner may pause momentarily on an unwanted signal but will resume searching in 2 or 3 seconds. The Data Skip feature is active as well as Scan mode and Service Search mode. Data Skip does not function during AM/WFM band Scan, Chain Search for AM/WFM band, or WX Search, Priority Scan, and Trunking mode. Frequency Skip If a particular frequency continues to interrupt search scanning, it is possible to set your scanner to skip the frequency. To skip over a frequency, press L/O when stopping at the frequency you want to skip or when in Search Hold mode. Note: • You can program up to 200 skip frequencies. The 201st skip frequency entered CH/ FRQ causes the first skipped frequency HOLD/ MAN RSM to unlock. SCAN SERVICE SEARCH MENU/BACK TRUNK • If all frequencies in the search range are set to skip, a beep sounds and it moves to Search L/O REVERSE . SELECT E Hold mode. To resume searching: 1) Cancel the Frequency Skip set. --- OR --- 2) Reset the Search Frequency range. To cancel all skipped frequencies, press and hold L/O for 2 seconds in Search Hold mode. Storing Search Frequencies You can quickly store any frequency you find during Search. 1. During Search, press HOLD/MAN to store or when the scanner stops on the frequency you want to store. 38