Uniden BC250D English Owners Manual - Page 83

Sound Quality Fine Tuning

Page 83 highlights

assigned theoretically, and the values are not to guarantee the operation of the unit. • The Mid threshold value will not change while adjusting the upper and lower limits. 4. Once you have adjusted the Sound Quality to the lowest possible level, press the E key. Press the RSM key to exit the Sound Quality Adjustment Mode. * To cancel the adjusted threshold level, press . (Decimal) key. * The adjusted threshold level for the current frequency can be set back to the default value by pressing and holding the . (Decimal) key. * When you change the Sound Quality it affects all other APCO P-25 signals in that same band. (UHF, VHF, or 800MHz) * You cannot enter the "Sound Quality Fine Tuning" mode when the scanner is operating as follows: 1) The receiving frequency is 0 MHz. 2) Air Band Frequency 3) BCi25D card is not inserted 4) BCi25D / P-25 monitoring is disabled 79

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110

79
assigned theoretically, and the values
are not to guarantee the operation of
the unit.
The
M
id threshold value will not change while
adjusting the upper and lower limits.
4.
Once you have adjusted the Sound Quality to the
lowest possible level, press the
E
key.
Press the
RSM
key to exit the Sound Quality
Adjustment Mode.
* To cancel the adjusted threshold level, press
(Decimal) key.
* The adjusted threshold level for the current frequency
can be set back to the default value by pressing and
holding the
(Decimal) key.
* When you change the Sound Quality it affects all
other APCO P-25 signals in that same band. (UHF,
VHF, or 800MHz)
* You cannot enter the
Sound Quality Fine Tuning
mode when the scanner is operating as follows:
1)
The receiving frequency is 0 MHz.
2)
Air Band Frequency
3)
BCi25D card is not inserted
4)
BCi25D / P-25 monitoring is disabled
.
.