Uniden BC250D English Owners Manual - Page 59
ID Scan Mode
View all Uniden BC250D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
ID Scan Mode 1. Press SCAN to begin scanning the lists you have programmed. ID SCAN 867.9875 NFM If you haven't programmed more than List 1234567890 2 IDs, ERROR appears on the display. 2. To remove a Scan List from active scanning, press the number of the Scan List on your keypad. Hint: Press and hold RSM for 2 seconds, the scanner will move to the next trunking bank. The Scan List indicator turns Off, and the IDs in that list are not scanned. Note: One Scan List must always be active. If you try and deactivate all the Scan Lists, Scan List 1 will automatically be active. 3. To restore a Scan List to active scanning, press its number again. 4. Press SEARCH to return to Trunk Tracking Search mode. Remember! When you press and hold TRUNK for 2 seconds, you can switch Trunk Tracking modes (Scan or Search). Note: • While ID scanning, to change all trunking banks to the Service Search mode, press SERVICE. • Selecting a Scan List is also possible in the Menu mode. (LTR only) • ID SCAN appears on the display during Trunk Scan instead of simply SCAN. 55