Uniden BC250D English Owners Manual - Page 56
Enter Id
View all Uniden BC250D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
4. Select 3:TALK GROUP by rotating the VFO and pressing E. 5. Select the ID location by rotating the VFO or using the keypad and then press E. You decide which location you want to place the Talk Group ID. (The first number represents the Scan List number and the second number represents the Memory Location number.) (Direct entry method example: enter "1-5" by pressing 1, . (decimal key), 5.) 6. Select 1:ID by rotating the VFO and pressing E. M1-5 ------ ¡ ENTER ID 7. Enter the ID. Note: After you have programmed the ID in a selected location, while still in the Menu mode, you can set your Alpha Tag (see page 28), or turn ON the Beep Alert for an individual talkgroup (see page 22). To enter a Type 2 Talk Group ID: M5-0 4128 1216¡ ENTER ID 1. Enter the ID you want to store. 2. Press E. To enter a Type 1 ID: For a Type I ID, the block number, Fleet M5-0 -----050-2¡ ENTER ID number and Subfleet number make up the talk group ID number. Please see page 98. 1. Enter the ID you want to store. (ID= Block number + Fleet number + . (decimal key) + Subfleet number) 2. Press E. To enter an EDACS® ID: 1. Enter the ID you want to store. Use the . (decimal key) for the "dash". 2. Press E. E5-0 -----09-022¡ ENTER ID Hint: Remember that Uniden's AFS format allows you to enter full or partial EDACS IDs for powerful flexibility in all modes. Be sure to read the section "EDACS Reception" on page 64 to learn how this works. Note: The BC250D default to "AFS" talkgroup displays for EDACS® only. 52