Uniden BC250D English Owners Manual - Page 86
Master, Slave
View all Uniden BC250D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
To connect the Scanner to Scanner: Plug the smaller end of each of the supplied Remote Interface Cables into the remote ports in accordance with the Null Modem Adapter Pin connections Female DB9 Male DB9 direction of the marks which are on the right sides of each of the two scanners. Plug the other ends of the cables (DB-9 serial connector) together using a DB-9 to DB-9 null modem adapter, and a Gender 1 4 2 3 3 2 4 6 & 1 5 5 6 4 7 8 8 7 9 Not used Changer Cable available at most computer stores. CH/ FRQ HOLD/ MAN SCAN RSM SERVICE SEARCH MENU/BACK TRUNK L/O REVERSE . SELECT E CH/ FRQ HOLD/ MAN SCAN RSM SERVICE SEARCH MENU/BACK TRUNK L/O REVERSE . SELECT E You can clone all of the programming of one BC250D into another, including frequencies, talkgroup IDs, alpha tags, delay settings, etc. After connecting the two scanners, turn the radios ON. Prepare each scanner for clone mode as follows. 1. Press MENU/BACK. 2. Select 3:SYSTEM OPTION / 6:CLONE by rotating the VFO and pressing E. 3. Determine the scanner that has the frequency data that you want to transfer. This one must be set up as the "Master Unit", and the other must be set as the "Slave Unit". 4. On the scanner that is the "Master Unit", select MASTER, then press E. 5. On the scanner that is the "Slave Unit", select SLAVE, then press E. CLONE SELECT UNIT MASTER SLAVE CLONE SELECT UNIT MASTER SLAVE 82