Uniden BC250D English Owners Manual - Page 43
Auto Storing
View all Uniden BC250D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
2. Press TRNSFR to store the frequency in the channel you selected. The smallest empty channel number flashes on the display. If necessary, you can also change the channel by scrolling the VFO. SRCH 12.5k 1240.0000 NFM Range 1 C004 0000.0000 3. Press E. Note: • If the frequency you want to store exists already, WARNING appears on the display and you will hear a beep. (See "Duplicate Frequency Alert" on page 27.) • After storing the frequency, it moves to the Search Hold mode. • In case there is a not a free channel, the frequency you want to store will automatically be stored in the previous channel before you entered into Chain Search mode. 4. Repeat steps 1, 2 and 3 after starting the search for all the search frequencies you want to store. Auto Storing The scanner automatically stores active frequencies if Auto Store feature is turned ON. But the frequencies already stored can not be stored. To make use of this feature, set a search range first (see page 37), then enter into the Menu mode. If you start this feature without setting a search range, NO LIMIT DATA appears on the display. 1. Press MENU/BACK. 2. Select 1:SERVICE OPTION / :CHAIN SEARCH / 6:AUTO STORE by rotating the VFO and pressing E. 3. Select 1:ON by rotating the VFO and pressing E. 4. Select the bank number you want to use with the keypad. The selected AUTO STORE SELECT BANK 12--56---- bank number appears on the display. Note: If the selected bank has no free channels to store, CH DATA FULL will appear on the display and you will hear a beep. AUTO STORE ERROR CH DATA FULL 39