Whirlpool WFC8090GX Installation Instructions - Page 31

Plug In Washer/Dryer

Get Whirlpool WFC8090GX PDF manuals and user guides View all Whirlpool WFC8090GX manuals
Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

2. Rock washer/dryer to test foot contact 4. Tighten leveling feet Jam nut Grip washer/dryer from top and rock back and forth, making sure all four feet are firmly on floor. Repeat, rocking washer/ dryer from side to side. If washer rocks, go to Step 3 and adjust leveling feet. If all four feet are in firm contact with floor, go to "Plug In Washer/Dryer." 3. Adjust leveling feet When washer/dryer is level and all four feet are firmly in contact with the floor, use a 1/2" (13 mm) open-end or adjustable wrench to turn jam nuts counterclockwise on leveling feet tightly against washer/dryer cabinet. Plug In Washer/Dryer In U.S.A. Jam nut If washer/dryer is not level, use a 1/2" (13 mm) open-end or adjustable wrench to turn jam nuts clockwise on feet until they are about 1/2" (13 mm) from the washer/dryer cabinet. Then turn the leveling foot clockwise to lower the washer/dryer or counterclockwise to raise the washer/dryer. Recheck levelness of washer/dryer and that all four feet are firmly in contact with the floor. Repeat as needed. 1. P lug into a grounded 3 or 4 prong outlet 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
31
2.
Rock washer/dryer to test foot contact
Grip washer/dryer from top and rock back and forth, making
sure all four feet are firmly on floor. Repeat, rocking washer/
dryer from side to side. If washer rocks, go to Step 3 and
adjust leveling feet. If all four feet are in firm contact with
floor, go to “Plug In Washer/Dryer.”
If washer/dryer is not level, use a 1/2" (13 mm) open-end or
adjustable wrench to turn jam nuts clockwise on feet until they
are about 1/2" (13 mm) from the washer/dryer cabinet. Then
turn the leveling foot clockwise to lower the washer/dryer or
counterclockwise to raise the washer/dryer. Recheck levelness
of washer/dryer and that all four feet are firmly in contact with
the floor. Repeat as needed.
3.
Adjust leveling feet
Jam nut
1.
Plug into a grounded 3 or 4 prong
outlet
In U.S.A.
Plug In Washer/Dryer
When washer/dryer is level and all four feet are firmly in
contact with the floor, use a 1/2" (13 mm) open-end or
adjustable wrench to turn jam nuts counterclockwise on
leveling feet tightly against washer/dryer cabinet.
4.
Tighten leveling feet
Jam nut