Xerox 5550DT User Guide (English) - Page 115
Using the Hole Puncher, Setting the Default Hole Punching Option
UPC - 095205740790
View all Xerox 5550DT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
Using the Hole Puncher Using the Hole Puncher Depending on your region, the optional finisher is factory configured with either a 3-hole punch or a 2- / 4-hole punch unit. To determine which option is installed on your printer, print a Configuration Page from the control panel. ■ When the hole punch option is turned on, sheets that are sent to the Stacker Upper Tray or the Stacker Lower Tray are punched. ■ When the hole punch option is turned off, no paper is punched. ■ When the printer detects that the punch waste box is full, a warning appears on the control panel, and printing continues without punching. To select hole punching in a supported driver: Operating System Windows 2000 or later Mac OS X (version 10.3 and higher) driver Steps 1. Select the Paper Output tab. 2. Select Hole Punch or the number of holes in the Hole Punch drop-down list. 1. In the Print dialog box, select Finishing Options from the drop-down list. 2. Select the number of holes under Hole Punching. Setting the Default Hole Punching Option The default hole punching option is selected through the control panel or through CentreWare IS. Control Panel To set the default hole punching option on the control panel: 1. On the control panel, select Printer Setup, and then press the OK button. 2. Select Paper Handling Setup, and then press the OK button. 3. Select Punch, and then press the OK button to toggle it on or off. 4. If you have a 2-hole and 4-hole punch, then set Punch Holes to 2 Holes or 4 Holes. CentreWare IS 1. Launch your web browser. 2. Enter your printer's IP address in the browser's Address field. 3. Click Properties. 4. In the left navigation tree, expand General and then click Printer Defaults. 5. Select On or Off in the Punch drop-down menu. 6. Select the desired number of holes in the Punch Holes drop-down menu. 7. Click the Save Changes button. Phaser® 5550 Printer 4-54