Xerox 5550DT User Guide (English) - Page 15
Operational Guidelines, Printing Safety Guidelines, Printer Supplies, Operational Safety - phaser driver
UPC - 095205740790
View all Xerox 5550DT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Operational Safety Operational Guidelines ■ Do not block or cover the slots and openings on the printer. The printer may overheat without adequate ventilation. ■ For optimum performance, use the printer at elevations below 3,000 m (11,480 ft.). ■ Do not place the printer near a heat source. ■ Do not place the printer in direct sunlight. ■ Do not place the printer in line with the cold air flow from an air conditioning system. ■ Place the printer on a level, solid non-vibrating surface with adequate strength for the weight of the printer. It should be within 2° of horizontal with all four feet in solid contact with the surface. The base printer weight without any packaging materials is approximately 41 kg (90 lb.). Printing Safety Guidelines ■ Wait 10 to 15 seconds between turning the printer off and on. ■ Keep hands, hair, neckties, etc. away from the exit and feed rollers. ■ Do not remove the paper source tray that you selected in either the printer driver or control panel. ■ Do not open the doors. ■ Do not move the printer. Warning: Avoid touching areas inside the printer that are labeled with a warning symbol. These areas may be very hot and can cause personal injury. Printer Supplies ■ Use the supplies specifically designed for your printer. The use of unsuitable materials may cause poor performance and a possible safety hazard. ■ Follow all warnings and instructions marked on, or supplied with, the printer, options and supplies. Phaser® 5550 Printer 1-7