Xerox 5550DT User Guide (English) - Page 58
Automatic Address Assignment, Enabling/Disabling Automatic Address Assignment with the Control Panel
UPC - 095205740790
View all Xerox 5550DT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
IPv6 Automatic Address Assignment Addresses can be assigned automatically when a router is found that offers one or more prefixes. Automatically assigned addresses are routeable. Each router-supplied prefix is combined with the Interface ID to create an address. The use of router-supplied prefixes is enabled by default. To enable/disable automatic address assignment, use one of the following options: ■ The printer's control panel ■ CentreWare IS Enabling/Disabling Automatic Address Assignment with the Control Panel To set the Interface ID on the control panel: 1. Select Printer Setup, and then press the OK button. 2. Select Connection Setup, and then press the OK button. 3. Select Network Setup, and then press the OK button. 4. Select TCP/IPv6 Setup, and then press the OK button. 5. Select Auto Assign, and then press the OK button to turn Auto Assign On or Off. Enabling/Disabling Automatic Address Assignment with CentreWare IS To set the Interface ID with CentreWare IS: 1. Launch your web browser. 2. Enter your printer's IP address in the browser's Address field. 3. Click Properties. 4. Select the Protocols folder on the left navigation panel, and then click TCP/IP. 5. Click the TCP/IP (v6) button. 6. Select/deselect Use router supplied prefixes. 7. Click the Save Changes button at the bottom of the page. Phaser® 5550 Printer 3-28