Xerox 5550DT User Guide (English) - Page 60
Manual Address Assignment, Setting the IPv6 Address with the Control Panel
UPC - 095205740790
View all Xerox 5550DT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
IPv6 Manual Address Assignment A manually entered IPv6 address is used in addition to any other IPv6 addresses. To create a manual address, enter the IPv6 address and prefix length in the fields provided in CentreWare IS. The default prefix length is 64. To manually set the IPv6 address, use one of the following options: ■ The printer's control panel ■ CentreWare IS Setting the IPv6 Address with the Control Panel To set the IPv6 address on the control panel: 1. Select Printer Setup, and then press the OK button. 2. Select Connection Setup, and then press the OK button. 3. Select Network Setup, and then press the OK button. 4. Select TCP/IPv6 Setup, and then press the OK button. 5. Select Manual Address, and then press the OK button to turn manual addressing on. 6. Select Manual Address, and then press the OK button. 7. To set the address: a. Use the Up Arrow and Down Arrow buttons to set the first number, and then press the OK button. b. Continue setting individual numbers, pressing the OK button after setting each one. When you get to the end of the address, press the OK button to return to the menu. Setting the IPv6 Address Using CentreWare IS To manually set the IPv6 address using CentreWare IS: 1. Launch your web browser. 2. Enter your printer's IP address in the browser's Address field. 3. Click Properties. 4. Select the Protocols folder on the left navigation panel, and then click TCP/IP. 5. Click the TCP/IP (v6) button. 6. In the Manual Address Assignment field, select Use this address, and then type the address. 7. Click the Save Changes button at the bottom of the page. Phaser® 5550 Printer 3-30