Yamaha AW2816 Tutorial - Page 16

5 Press the MIXER section [DYN] key to access the dynamics parameters. 6 Press the DYN button, and then press the [F2] key located below the screen. In this screen, load a library whose TYPE field is displayed as "EXP." Move the cursor to "ON/ OFF" and turn dynamics "ON" for the selected track. 7 Use the CURSOR keys and the [DATA/JOG] dial to make the following dynamics settings. DYNAMICS Expander Threshold Ratio Out Gain Attack Release Knee -14 dB 3.5:1 3.5 dB 0 ms 70 ms 2 s Channel 7: Percussion For the percussion channel, we will cut the 125 Hz region by -8.0 dB to reduce the weight of the low range, making the sound a bit lighter. In the dynamics section, we will use a compander to increase the perceived loudness to compensate for the reduction in the low range. EQ (ATT -7 dB) LOW L-MID Q L.SHELF 0.50 F 125 Hz 1.00 kHz G -8.0 dB 1.0 dB H-MID - - 0.0 HIGH - - 0.0 Type Compander soft Threshold Ratio Out Gain Attack Release Width -13 dB 3:1 0.0 dB 14 ms 87 ms 1 dB Tutorial 15