Yamaha CVP-203 Owner's Manual - Page 102

Recording Your Performances and Creating Songs- Song Creator Select the Recording Options: Starting, Stopping, Punching In/Out - Rec Mode From this display you can set up how recording is started and stopped for either Quick Recording or Multi Recording. To call up these settings, select the REC MODE display by using the [BACK][NEXT] button, after performing operation steps 1 - 3 on page 97. These settings determine how recording will start. Normal Pressing the SONG [START/STOP] button enables Synchro standby and overwrite recording starts as soon as you start playing the keyboard. First Key On Overwrite recording starts as soon as you start playing the keyboard. This setting also preserves the previous lead-in data, letting you record over the original lead-in without erasing it. Punch In At The song plays back normally up to the indicated Punch In measure (set by the [3LM] buttons), then starts overwrite recording at that Punch In measure. Determines the measure at which Punch In overwrite recording starts (when "PUNCH IN AT" is selected). These settings determine how recording will stop as well as what happens to previously recorded data. Replace All This deletes all data following the point at which Punch Out recording is stopped. Punch Out At This maintains all data following the point at which recording is stopped. Overwrite recording continues until the indicated Punch Out measure (set by the [6LM] buttons), then stops at that Punch Out measure, after which song playback continues normally. Calls up the SONG display, from which you can save the edited data. When this is set to ON, you can use the sostenuto (center) pedal to control the punch-in and punch-out points. Press and hold down the sostenuto pedal to record. Recording stops when you release the pedal. Determines the Punch Out measure - the measure at which Punch In overwrite recording stops (when "PUNCH OUT AT" is selected). When the Pedal Punch In/ Out function is set to ON, the current function assignment of the sostenuto pedal is cancelled. About Punch In/Out This feature is useful primarily for re-recording or replacing a specific section of an already recorded channel. The illustrations below indicate a variety of situations in which selected measures in an eight-measure phrase are re-recorded. REC START setting REC END setting Original data 1 2 3 4 5 6 7 8 NORMAL REPLACE ALL Start/start overwrite recording *1 Stop recording *2 1 2 3 4 5 Deleted NORMAL PUNCH OUT Start/start overwrite recording *1 Stop recording *2 1 2 3 4 5 6 7 8 *1 When measures 1 - 2 are not overwritten, recording starts from measure 3. *2 You'll have to press the [REC] button at the end of 5 measures. NORMAL Start/start overwrite recording *1 Stop overwrite recording/ play original data PUNCH OUT AT=006 1 2 3 4 5 6 7 8 FIRST KEY ON REPLACE ALL Start/ play back original data Start playing the keys/ start overwrite recording 1 2 3 4 Stop recording *2 5 Deleted FIRST KEY ON PUNCH OUT Start/ play back original data Start playing the keys/ start overwrite recording Stop recording *2 1 2 3 4 5 6 7 8 FIRST KEY ON Start/ play back original data Start playing the keys/ start overwrite recording Stop overwrite recording/ play original data PUNCH OUT AT=006 1 2 3 4 5 6 7 8 PUNCH IN AT=003 REPLACE ALL Start/ play back original data Start overwrite recording 1 2 3 4 Stop recording *2 5 Deleted PUNCH IN AT=003 PUNCH OUT Start/ play back original data Start overwrite recording Stop recording *2 1 2 3 4 5 6 7 8 PUNCH IN AT=003 PUNCH OUT AT=006 Start/ play back original data Start overwrite recording Stop overwrite recording/ play original data 1 2 3 4 5 7 Previously recorded data Newly recorded data Deleted data 102 CVP-205/203