Yamaha CVP-203 Owner's Manual - Page 147
Using the TO HOST terminal, IBM-PC/AT (Windows), Macintosh, Using the MIDI terminals - clavinova manual
View all Yamaha CVP-203 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
Using Your Clavinova with Other Devices Using the TO HOST terminal Connect the serial port of the personal computer (RS232C terminal or RS-422 terminal) to the TO HOST terminal of the CVP-205/203. For the connection cable, use the appropriate cable below (sold separately) that matches the personal computer type. If your system does not work properly with the connections and settings listed above, your software may require different settings. Check your software operation manual and set the HOST SELECT switch to the proper data transfer rate. (Data transfer rate of "PC-1" is 31,250 bps.) I IBM-PC/AT (Windows) Connect the RS-232C terminal on the computer to the TO HOST terminal on the CVP-205/203 using a serial cable (D-SUB 9P ¡ MINI DIN 8P cross cable). Set the CVP-205/203 HOST SELECT switch to the "PC-2." (Data transfer rate is 38,400 bps.) Clavinova MINI DIN 8-pin NEC MultiSync PC-9821 AS D-sub NEC 9-pin CVP-205 PC-2 MIDI PC-1 Mac CVP-203 Mac MIDI PC-1 PC-2 MINI DIN 8-pin D-sub D-sub 25-pin 9-pin * When using a D-SUB 25P ¡ MINI DIN 8P cross cable, connect using a DSUB9P plug adaptor on the computer side of the cable. I Macintosh Connect RS-422 terminal (modem or printer) on the computer to the TO HOST terminal on the CVP-205/ 203 using a serial cable (system peripheral cable, 8 bit). Set the CVP-205/203 HOST SELECT switch to the "MAC" (Data transfer rate is 31,250 bps). Set the MIDI interface clock in the sequencer you are using to 1 MHz. For details, refer to the owner's manual for the particular software you are using. Using the MIDI terminals When using a MIDI interface device installed in the personal computer, connect the MIDI terminals of the personal computer and the CVP-205/203 with standard MIDI cables. • When the computer has a MIDI interface installed, connect the MIDI OUT terminal of the personal computer to the MIDI IN terminal. Set the HOST SELECT switch to "MIDI." Clavinova MIDI IN MIDI OUT CVP-205 PC-2 MIDI PC-1 Mac CVP-203 Mac PC-1 MIDI PC-2 MIDI OUT MIDI IN NEC MultiSync PC-9821 AS NEC • When using a MIDI interface with a Macintosh series computer, connect the RS-422 terminal of the computer (modem or printer terminal) to the MIDI interface, then connect the MIDI OUT terminal on the MIDI interface to the MIDI IN terminal of the CVP205/203, as shown in the diagram below. Set the HOST SELECT switch to "MIDI." Clavinova MIDI IN MIDI OUT CVP-205 PC-2 MIDI PC-1 Mac CVP-203 Mac PC-1 MIDI PC-2 RS422 MINI DIN 8-pin • When the HOST SELECT switch is set to "MIDI," the TO HOST terminal is disabled. • When using a Macintosh series computer, set the MIDI interface clock setting in the application software to match the setting of the MIDI interface you are using. For details, refer to the owner's manual for the particular software you are using. Clavinova MINI DIN 8-pin CVP-205 PC-2 MIDI PC-1 Mac CVP-203 Mac PC-1 MIDI PC-2 MINI DIN 8-pin CVP-205/203 147