Yamaha CVP-203 Owner's Manual - Page 17
Connect the power cord., Adjusting the display contrast, Setting the volume - lcd
View all Yamaha CVP-203 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Turning the Power On and Off Connect the power cord. 1 Insert the plugs at the ends of the cord, one into the AC INLET on the Clavinova, and the other into a standard AC outlet. In some areas, a plug adapter may be provided to match the pin configuration of the AC wall outlets in your area. CVP-205 CVP-203 Adjusting the display contrast If the LCD is difficult to read, adjust the contrast with the [LCD CONTRAST] knob at the right of the LCD. LCD CONTRAST Setting the volume Use the [MASTER VOLUME] dial to adjust the volume to an appropriate level. MASTER VOLUME FADE IN / OUT (The shape of plug differs depending on locale.) 2 Press the [POWER] switch. ¡ The main display appears in the LCD display. The drive lamp below the lower right end of the keyboard also lights. MIN MAX CAUTION Do not use the Clavinova at a high volume level for a long period of time, or your hearing may be damaged. Using headphones Connect a pair of headphones to one of the [PHONES] jacks. Two [PHONES] jacks are provided. Two sets of standard stereo headphones can be plugged in. (If you are using only one pair of headphones, you can plug them into either of these jacks.) POWER ON OFF The drive lamp lights. A F B G C H D I E J BALANCE CHANNEL ON / OFF PART CVP-205 INPUT VOLUME MIC. LINE IN MIC. LINE PHONES MIN MAX CVP-203 PHONES When you're ready to turn off the power, press the [POWER] switch again. ¡ Both the display and the drive lamp below the right end of the keyboard will turn off. CVP-205/203 17