ZyXEL P-2802HWL-I1 User Guide - Page 61

Chapter 3 Internet and Wireless Setup Wizard " The wireless stations and ZyXEL Device must use the same SSID, channel ID and WEP encryption key (if WEP is enabled), WPA-PSK (if WPA-PSK is enabled) for wireless communication. 4 This screen varies depending on the security mode you selected in the previous screen. Fill in the field (if available) and click Next. 3.3.1 Manually Assign a WPA-PSK key Choose Manually assign a WPA-PSK key in the Wireless LAN setup screen to set up a PreShared Key. Figure 21 Manually Assign a WPA-PSK key The following table describes the labels in this screen. Table 11 Manually Assign a WPA-PSK key LABEL DESCRIPTION Pre-Shared Key Type from 8 to 63 case-sensitive ASCII characters. You can set up the most secure wireless connection by configuring WPA in the wireless LAN screens. You need to configure an authentication server to do this. Back Click Back to display the previous screen. Next Click Next to proceed to the next screen. Exit Click Exit to close the wizard screen without saving. 3.3.2 Manually Assign a WEP Key Choose Manually assign a WEP key to setup WEP Encryption parameters. P-2802H(W)(L)-I Series User's Guide 61