ZyXEL P-330W User Guide - Page 116
Built-in Ethernet, TCP/IP, Using DHCP, Con Manually, IP Address, Subnet mask, Router address
View all ZyXEL P-330W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
ZyXEL P-330W User's Guide • Select Built-in Ethernet from the Show list. • Click the TCP/IP tab. 3 For dynamically assigned settings, select Using DHCP from the Configure list. Figure 82 Macintosh OS X: Network 4 For statically assigned settings, do the following: • From the Configure box, select Manually. • Type your IP address in the IP Address box. • Type your subnet mask in the Subnet mask box. • Type the IP address of your P-330W in the Router address box. 5 Click Apply Now and close the window. 6 Turn on your P-330W and restart your computer (if prompted). Verifying Settings Check your TCP/IP properties in the Network window. Appendix C Setting up Your Computer's IP Address 116
ZyXEL P-330W User’s Guide
Appendix C Setting up Your Computer’s IP Address
116
•
Select
Built-in Ethernet
from the
Show
list.
•
Click the
TCP/IP
tab.
3
For dynamically assigned settings, select
Using DHCP
from the
Configure
list.
Figure 82
Macintosh OS X: Network
4
For statically assigned settings, do the following:
•
From the
Configure
box, select
Manually
.
•
Type your IP address in the
IP Address
box.
•
Type your subnet mask in the
Subnet mask
box.
•
Type the IP address of your P-330W in the
Router address
box.
5
Click
Apply Now
and close the window.
6
Turn on your P-330W and restart your computer (if prompted).
Verifying Settings
Check your TCP/IP properties in the
Network
window.