ZyXEL P-330W User Guide - Page 66
WDS Settings - bridge setup
View all ZyXEL P-330W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
ZyXEL P-330W User's Guide Table 24 Wireless Security Setup: WPA LABEL Password Save Reset DESCRIPTION Enter a password (up to 31 alphanumeric characters) as the key to be shared between the external authentication server and the P-330W. The key must be the same on the external authentication server and your P330W. The key is not sent over the network. Click Save to save your changes back to the P-330W. Click Reset to reload the previous configuration for this screen. 5.8 WDS Settings The WDS (Wireless Distribution System) allows you to configure the P-330W to connect two or more APs via wireless when P330's wireless mode is set to WDS or AP+WDS mode. An AP using WDS can function as a wireless network bridge allowing you to wirelessly connect two wired network segments. Figure 37 Wireless: WDS Settings The following table describes the labels in this screen. Table 25 Wireless: WDS Settings LABEL Enable WDS MAC Address Comment DESCRIPTION Select this check box to enable the WDS. Enter the MAC addresses of the neighboring AP(s) that particapates in the WDS. Enter the MAC addresses in a valid MAC address format, that is, six hexadecimal character pairs, for example, 001349556677. Enter in a descriptive name so you know which device the MAC address is associated with. Chapter 5 Wireless 66