ZyXEL P-330W User Guide - Page 82

TCP/IP-based networks.

Page 82 highlights

ZyXEL P-330W User's Guide Table 35 PPPoE Encapsulation LABEL DESCRIPTION Set DNS Manually Use this if your ISP does not assign a DNSP server when it assigns you an IP address. DNS 1 - 3 Enter in your ISP's DNS server IP address here. You must enter in 1. Clone MAC Address Your ISP may require a particular MAC address in order for you to connect to the Internet. This MAC address is the PC's MAC address that your ISP had originally connected your Internet connection to. Type in this Clone MAC address in this section to replace the WAN MAC address with the MAC address of that PC. Respond to WAN Put a check in this box to reply to ping packets. Ping Enable UPnP UPnP (Universal Plug and Play) allows automatic discovery and configuration of the Wireless Router. UPnP is by supported by Windows ME, XP, or later. Put a check in this box to allow the router configuration to be changed by UPnP devices. IPSec Passthrough Put a check in this box to enable computers on your LAN to make IPSec VPN connections to servers on the Internet. PPTP Passthrough Put a check in this box to enable computers on your LAN to make PPTP VPN connections to servers on the Internet. L2TP Passthrough Put a check in this box to enable computers on your LAN to make L2TP VPN connections to servers on the Internet. Save Click Save to save your changes back to the P-330W. Reset Click Reset to begin configuring this screen afresh. 6.7.4 PPTP Encapsulation Point-to-Point Tunneling Protocol (PPTP) is a network protocol that enables secure transfer of data from a remote client to a private server, creating a Virtual Private Network (VPN) using TCP/IP-based networks. PPTP supports on-demand, multi-protocol and virtual private networking over public networks, such as the Internet. The screen shown next is for PPTP encapsulation. Chapter 6 Advanced Options 82

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141

ZyXEL P-330W User’s Guide
Chapter 6 Advanced Options
82
6.7.4
PPTP Encapsulation
Point-to-Point Tunneling Protocol (PPTP) is a network protocol that enables secure transfer of
data from a remote client to a private server, creating a Virtual Private Network (VPN) using
TCP/IP-based networks.
PPTP supports on-demand, multi-protocol and virtual private networking over public
networks, such as the Internet.
The screen shown next is for
PPTP
encapsulation.
Set DNS
Manually
Use this if your ISP does not assign a DNSP server when it assigns you an IP
address.
DNS 1 - 3
Enter in your ISP’s DNS server IP address here.
You must enter in 1.
Clone MAC
Address
Your ISP may require a particular MAC address in order for you to connect to the
Internet. This MAC address is the PC’s MAC address that your ISP had originally
connected your Internet connection to. Type in this Clone MAC address in this
section to replace the WAN MAC address with the MAC address of that PC.
Respond to WAN
Ping
Put a check in this box to reply to ping packets.
Enable UPnP
UPnP (Universal Plug and Play) allows automatic discovery and configuration of the
Wireless Router. UPnP is by supported by Windows ME, XP, or later.
Put a check
in this box to allow the router configuration to be changed by UPnP devices.
IPSec
Passthrough
Put a check in this box to enable computers on your LAN to make IPSec VPN
connections to servers on the Internet.
PPTP
Passthrough
Put a check in this box to enable computers on your LAN to make PPTP VPN
connections to servers on the Internet.
L2TP
Passthrough
Put a check in this box to enable computers on your LAN to make L2TP VPN
connections to servers on the Internet.
Save
Click
Save
to save your changes back to the P-330W.
Reset
Click
Reset
to begin configuring this screen afresh.
Table 35
PPPoE Encapsulation
LABEL
DESCRIPTION