ZyXEL P-330W User Guide - Page 35

Wizard Setup: Screen 4 - access point

Page 35 highlights

ZyXEL P-330W User's Guide Figure 9 Wizard 3: Wireless LAN Basic Setup The following table describes the labels in this screen. Table 8 Wizard 3: Wireless LAN Basic Setup LABEL Band SSID Channel Number Disable Access Point Cancel Back Next DESCRIPTION Choose the operating mode of your wireless access point. 2.4Ghz (B+G) offers the greatest compatibility. 2.4 GHz (B) will only allow 802.11b clients to connect to the wireless LAN. 2.4 GHz (G) will only allow 802.11g clients to connect to the wireless LAN. Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the wireless LAN. If you change this field on the P-330W, make sure all wireless stations use the same SSID in order to access the network. To manually set the P-330W to use a channel, select a channel from the drop-down list box. Select this check box to disable the wireless LAN capabilities of your P-330W. Click Cancel to abort the setup wizard. Click Back to display the previous screen. Click Next to proceed to the next screen. Note: The wireless stations and P-330W must use the same SSID, channel ID and encryption key (if encryption is enabled) for wireless communication 3.4 Wizard Setup: Screen 4 There are 5 different versions of this page depending on what method of encryption you want to enable on your wireless LAN. 35 Chapter 3 Wizard Setup

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141

ZyXEL P-330W User’s Guide
35
Chapter 3 Wizard Setup
Figure 9
Wizard 3: Wireless LAN Basic Setup
The following table describes the labels in this screen.
3.4
Wizard Setup: Screen 4
There are 5 different versions of this page depending on what method of encryption you want
to enable on your wireless LAN.
Table 8
Wizard 3: Wireless LAN Basic Setup
LABEL
DESCRIPTION
Band
Choose the operating mode of your wireless access point.
2.4Ghz (B+G)
offers the
greatest compatibility.
2.4 GHz (B)
will only allow 802.11b clients to connect to the
wireless LAN.
2.4 GHz (G)
will only allow 802.11g clients to connect to the wireless
LAN.
SSID
Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the wireless
LAN.
If you change this field on the P-330W, make sure all wireless stations use the same
SSID in order to access the network.
Channel
Number
To manually set the P-330W to use a channel, select a channel from the drop-down list
box.
Disable
Access Point
Select this check box to disable the wireless LAN capabilities of your P-330W.
Cancel
Click
Cancel
to abort the setup wizard.
Back
Click
Back
to display the previous screen.
Next
Click
Next
to proceed to the next screen.
Note:
The wireless stations and P-330W must use the same
SSID, channel ID and encryption key (if encryption is enabled)
for wireless communication