ZyXEL P-660R-T1 v3s User Guide - Page 111
Filters, P-660R-Tx v3s User's Guide, Access Management > Filter IP/MAC continued
View all ZyXEL P-660R-T1 v3s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Chapter 15 Filters Table 34 Access Management > Filter (IP/MAC) (continued) LABEL DESCRIPTION IP/MAC Filter Rule Index Select the index number of the filter rule. Rule Type Select IP or MAC type to configure the rule. Use the IP Filter to block traffic by IP addresses. Use the MAC Filter to block traffic by MAC address. Active Use this field to enable or disable the rule. Source IP Address Enter the source IP address of the packets you wish to filter. This field is ignored if it is 0.0.0.0. Subnet Mask Enter the IP subnet mask for the source IP address Port Number Enter the source port of the packets that you wish to filter. The range of this field is 0 to 65535. This field is ignored if it is 0. Destination IP Address Enter the destination IP address of the packets you wish to filter. This field is ignored if it is 0.0.0.0. Subnet Mask Enter the IP subnet mask for the destination IP address. Port Number Enter the destination port of the packets that you wish to filter. The range of this field is 0 to 65535. This field is ignored if it is 0. Protocol Select ICMP, TCP or UDP for the upper layer protocol. MAC Address This field is only available when you select MAC in the Rule Type field. Enter the MAC address of the packets you wish to filter. Rule Unmatched Select the action for a packet not matching the rule. Select Forward to forward traffic immediately and skip checking the remaining rules. Select Next to check the next rule. IP/MAC Filter Listing IP/MAC Filter Set Index Select the index number of the filter set from the drop-downl list box. Interface This is the interface that the filter set applies to. Direction The filter set applies to this traffic direction. # This is the index number of the rule in a filter set. Active This field shows whether the rule is activated. Src Address/Mask This is the source IP address and subnet mask when you select IP as the rule type. This is the MAC address when you select MAC as the rule type. Dest IP/Mask This is the destination IP address and subnet mask. Src Port This is the source port number. Dest Port This is the destination port number. Protocol This is the upper layer protocol. Unmatched When a packet doesn't match the rule, this is the action the ZyXEL Device takes on the packet. SAVE Click this to save your changes. DELETE Click this to remove the filter rule. CANCEL Click this to restore your previously saved settings. P-660R-Tx v3s User's Guide 111