ZyXEL P-660R-T1 v3s User Guide - Page 86

The IP Address Mapping Screen, Address Mapping, Multiple, Number of IPs

Page 86 highlights

Chapter 10 Network Address Translation (NAT) Table 24 Advanced Setup > NAT > Virtual Server LABEL DESCRIPTION Start Port Number Enter a port number in this field. To forward only one port, enter the port number again in the End Port Number field. To forward a series of ports, enter the start port number here and the end port number in the End Port Number field. End Port Number Enter a port number in this field. To forward only one port, enter the port number again in the Start Port Number field above and then enter it again in this field. To forward a series of ports, enter the last port number in a series that begins with the port number in the Start Port Number field above. Local IP Address Enter the inside IP address of the server in this field. Virtual Server Listing Rule This is the rule's index number. Application This is a service's name. Protocol This is the IP port. Start Port This is the first port number that identifies a service. End Port This is the last port number that identifies a service. Local IP Address This is the server's IP address. SAVE Click this to save your changes. DELETE Click this to remove the rule. BACK Click this to return to the previous screen without saving. CANCEL Click this to restore your previously saved settings. 10.5 The IP Address Mapping Screen Configure this screen if you have multiple IP addresses from your ISP and you want to map them to private IP addresses on your LAN. " The Address Mapping screen is available only when you select Multiple for the Number of IPs in the NAT screen. Ordering your rules is important because the ZyXEL Device applies the rules in the order that you specify. When a rule matches the current packet, the ZyXEL Device takes the corresponding action and the remaining rules are ignored. 86 P-660R-Tx v3s User's Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216

Chapter 10 Network Address Translation (NAT)
P-660R-Tx v3s User’s Guide
86
10.5
The IP Address Mapping Screen
Configure this screen if you have multiple IP addresses from your ISP and you want to map
them to private IP addresses on your LAN.
The
Address Mapping
screen is available only when you select
Multiple
for
the
Number of IPs
in the
NAT
screen.
Ordering your rules is important because the ZyXEL Device applies the rules in the order that
you specify. When a rule matches the current packet, the ZyXEL Device takes the
corresponding action and the remaining rules are ignored.
Start Port Number
Enter a port number in this field.
To forward only one port, enter the port number again in the
End Port Number
field.
To forward a series of ports, enter the start port number here and the end port
number in the
End Port Number
field.
End Port Number
Enter a port number in this field.
To forward only one port, enter the port number again in the
Start
Port Number
field above and then enter it again in this field.
To forward a series of ports, enter the last port number in a series that begins with
the port number in the
Start Port Number
field above.
Local IP Address
Enter the inside IP address of the server in this field.
Virtual Server Listing
Rule
This is the rule’s index number.
Application
This is a service’s name.
Protocol
This is the IP port.
Start Port
This is the first port number that identifies a service.
End Port
This is the last port number that identifies a service.
Local IP Address
This is the server’s IP address.
SAVE
Click this to save your changes.
DELETE
Click this to remove the rule.
BACK
Click this to return to the previous screen without saving.
CANCEL
Click this to restore your previously saved settings.
Table 24
Advanced Setup > NAT > Virtual Server
LABEL
DESCRIPTION